暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black 80 mm square case fan 15 mm thick three pin connector

Zyvpee

Zyvpee 3106RL-04W-S19 CA3 80×15 mm 12 V .09 A 3-pin case fan

SKU CH-8RZ3-0GZ6G

An 80 mm by 15 mm ball-bearing case fan running at 12 V and 0.09 A with a 3-pin connector for CPU cooler airflow

  • TypeCase Fan
  • CompatibilityCPU Cooler
  • Bearing TypeBall
  • Power Connector3 Pin
  • ColorBlack
  • LEDNon-LED
  • Compact 80×15 mm frame fits tight chassis spaces
  • Ball bearing design extends operational lifespan
  • 12 V 0.09 A draw keeps power usage low
  • Three-pin connector enables motherboard speed control
  • Non-LED black finish suits understated builds

Zyvpee 80×15 mm 12 V case fan

The Zyvpee 3106RL-04W-S19 CA3 is an 80 mm square frame fan 15 mm thick. It runs on 12 V DC drawing 0.09 A through a three-pin power connector. Ball bearing construction supports continuous inverter cooling duties in compact enclosures.

Fits tight CPU coolers only

Suits builders replacing an 8015 form-factor fan on an existing heatsink or small chassis. The 3-wire lead provides basic speed reporting without PWM control. Buyers who need variable speed headers or larger airflow should look at other options.

Three-pin 12 V 0.09 A power connector

The 3-pin plug delivers fixed 12 V supply and a tachometer signal to the motherboard. No fourth wire means no duty-cycle speed regulation from the board. Verify the header layout and voltage before installing.

特長

  • Compact 80×15 mm frame fits tight chassis spaces
  • Ball bearing design extends operational lifespan
  • 12 V 0.09 A draw keeps power usage low
  • Three-pin connector enables motherboard speed control
  • Non-LED black finish suits understated builds

仕様

BrandZyvpee
Series3106RL-04W-S19 CA3
Model3106RL-04W-S19 CA3
TypeCase Fan
CompatibilityCPU Cooler
Bearing TypeBall
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesInverter Cooling
Dimensions80*15mm

この商品に関する質問

What size mounting holes does the 80 mm frame use?

The fan measures 80 by 15 mm, matching the standard 80 mm square mounting pattern used on most CPU coolers and case fan grills.

How do I connect the three-pin power lead to a motherboard header?

Align the keyed 3-pin connector with the 12 V fan header on the board; the third pin carries the tachometer signal so the BIOS can report speed.

When should the ball-bearing assembly be replaced?

Ball bearings typically run for years; replace the fan if noise increases noticeably or the rotor stops spinning at the rated 12 V .09 A input.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。