暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black 120mm square case fan with 3-pin connector

Zyvpee

Zyvpee 4710NL-04W-B59 P06 120mm 12V 0.74A 3-pin case fan

SKU CH-T244-NBSP8

A 120 mm square case fan with ball bearing, 12 V 0.74 A draw and a 3-pin power connector

  • TypeCase Fan
  • CompatibilityCPU Cooler
  • Bearing TypeBall
  • Power Connector3 Pin
  • ColorBlack
  • LEDNo
  • Ball-bearing motor for long-term reliability
  • 12 V 0.74 A input for consistent airflow
  • 3-pin power connector fits standard headers
  • 120 mm × 25 mm frame matches common mounts
  • Black finish with no LED for subtle builds

120 mm 3-pin case fan

The Zyvpee 4710NL-04W-B59 P06 is a 120 mm by 25 mm DC fan with a three-pin power connector. It uses a ball bearing and runs on 12 V at 0.74 A. The frame is black and there are no LEDs.

Suits basic cooling builds

This fan fits standard 120 mm mounting points on a CPU cooler or case. It is not for builders who need PWM speed control, addressable lighting or a different frame thickness. Buyers wanting variable speed headers or RGB effects should look elsewhere.

3-pin DC power connector

The three-pin connector supplies fixed-voltage power without a PWM signal. Motherboards that only offer four-pin headers will still run the fan, but speed control will be limited to voltage regulation.

特長

  • Ball-bearing motor for long-term reliability
  • 12 V 0.74 A input for consistent airflow
  • 3-pin power connector fits standard headers
  • 120 mm × 25 mm frame matches common mounts
  • Black finish with no LED for subtle builds

仕様

Brand3ccooler.com
Series4710NL-04W-B59 P06
Model4710NL-04W-B59 P06
TypeCase Fan
CompatibilityCPU Cooler
Bearing TypeBall
Power Connector3 Pin
ColorBlack
LEDNo
FeaturesPower Case Fan
Dimensions120*25MM

この商品に関する質問

What motherboard header does the 3-pin connector on this fan plug into?

It connects to any standard 3-pin or 4-pin DC fan header on the motherboard, keyed so it cannot be inserted backwards.

Will the 120 mm by 25 mm frame fit the same mounting holes as my existing 120 mm fans?

Yes, the 120*25 mm dimensions match the industry-standard 120 mm mounting pattern, so it aligns with the screw holes used by other 120 mm fans.

How can I confirm the fan is spinning at the correct speed after installation?

Check the RPM reading in the BIOS hardware monitor or a software utility; it should report a steady value once the system is running.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。