暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

Zyvpee

Zyvpee A6025-40BB-3AN-F1 12V 0.16A 60x25mm case fan

SKU CH-K5A1-6ZY7D

Compact 60 mm by 25 mm case fan runs on 12 V at 0.16 A with a three-pin connector and ball bearing

  • TypeCase Fan
  • CompatibilityCPU Cooler
  • Bearing TypeBall
  • Power Connector3 Pin
  • ColorBlack
  • LEDNon-LED
  • Compact 60x25mm size fits tight case spaces
  • Ball bearing design extends operational lifespan
  • 12V 0.16A power draw keeps energy use low
  • Three-pin connector enables speed monitoring control
  • Non-LED black frame suits subtle build aesthetics

Compact 60 mm case fan for tight builds

The Zyvpee A6025-40BB-3AN-F1 is a 12 V, 0.16 A DC fan measuring 60 by 25 mm. It fits small-form-factor chassis and CPU coolers that require a slim 6025 frame. The three-pin connector provides basic voltage control without PWM complexity.

Ball-bearing motor keeps noise steady over long

A ball bearing supports the rotor, reducing wear compared with sleeve designs when the fan runs continuously. At 12 V the current draw stays at 0.16 A, so heat output remains predictable during extended workloads. The non-LED black blades avoid light bleed in darkened enclosures.

Three-pin header simplifies motherboard

The 3-pin plug carries power, ground and tachometer signal for RPM monitoring in BIOS or software. No extra adapters are needed for standard 3-pin headers on most boards. Black finish and absent LEDs keep the appearance neutral in any build.

特長

  • Compact 60x25mm size fits tight case spaces
  • Ball bearing design extends operational lifespan
  • 12V 0.16A power draw keeps energy use low
  • Three-pin connector enables speed monitoring control
  • Non-LED black frame suits subtle build aesthetics

仕様

BrandZyvpee
SeriesA6025-40BB-3AN-F1
ModelA6025-40BB-3AN-F1
TypeCase Fan
CompatibilityCPU Cooler
Bearing TypeBall
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesDC Case Fan
Dimensions60*25mm

この商品に関する質問

How much noise and heat does the 60 mm ball-bearing fan produce when it runs continuously at 12 V?

The 12 V, 0.16 A ball-bearing motor runs at a modest current draw, so sustained operation keeps acoustic output and waste heat low for a 60×25 mm frame.

What connector must my motherboard or controller provide for the three-pin plug on this fan?

A standard three-pin 12 V DC header — the fan draws 0.16 A and uses a simple three-wire connection without PWM.

Will the 60×25 mm mounting holes line up with the fan brackets on my older CPU cooler?

Yes, the 60 mm square footprint and 25 mm thickness match the common 6025 mounting pattern used on many legacy coolers.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。