暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

Zyvpee

Zyvpee DFS802512L 80x25mm 12V 1.1W 1868RPM 22.3dBA Blue Ball Bearing Case Fan

SKU CH-8042-8KJPT

An 80 by 25 millimetre 12 volt DC axial fan with ball bearing, 1.1 watt draw, 1868 RPM speed and 22.3 dBA noise

  • TypeCase Fan
  • CompatibilityCPU Cooler
  • Bearing TypeBall
  • Power Connector2 Pin
  • ColorBlue
  • LEDNon-LED
  • Ball bearing for durable operation at 1868 RPM
  • Low 22.3 dBA noise suits quiet builds
  • 12 V 1.1 W draw keeps power use minimal
  • 80×25 mm frame fits standard 8 cm mounts
  • Compatible with BCD-450 and BCD-448 refrigerator models

Compact 80 mm axial fan

The Zyvpee DFS802512L is a 12 V DC axial fan measuring 80 by 25 mm. It draws 0.09 A at 1.1 W and spins at 1868 RPM while producing 22.3 dBA. A blue two-pin ball-bearing motor makes it suitable for tight CPU cooler mounts or small chassis intake.

Airflow headroom and noise floor

At 1868 RPM the fan delivers a focused stream for modest heatsinks or refrigerator-style enclosures. The low 1.1 W draw leaves thermal headroom for passive radiators, yet the single-speed design cannot scale down for silent idle periods.

Two-pin DC power constraint

The two-pin connector supplies fixed 12 V DC without PWM or voltage control. Speed and noise stay constant, so builders needing motherboard fan curves or automatic low-speed operation should look elsewhere.

特長

  • Ball bearing for durable operation at 1868 RPM
  • Low 22.3 dBA noise suits quiet builds
  • 12 V 1.1 W draw keeps power use minimal
  • 80×25 mm frame fits standard 8 cm mounts
  • Compatible with BCD-450 and BCD-448 refrigerator models

仕様

BrandZyvpee
SeriesDFS802512L
ModelDFS802512L
TypeCase Fan
CompatibilityCPU Cooler
Bearing TypeBall
Power Connector2 Pin
ColorBlue
LEDNon-LED
FeaturesDC axial fan
Dimensions80*25mm

この商品に関する質問

Will the 2-pin connector on this DFS802512L fan work with the 3-pin header on my older motherboard?

Yes, the 2-pin plug fits a 3-pin header by leaving the speed-sense pin empty; the fan will run at full 1868 RPM but speed reporting will be unavailable.

How can I confirm the fan is running at the rated 1868 RPM and 22.3 dBA after installation?

Use BIOS hardware monitor or software such as HWInfo to read the fan-speed sensor; an audible check at close range should reveal a quiet 22.3 dBA hum with no bearing rattle.

Does the box include mounting screws or a 2-pin to 3-pin adapter, or must I buy them separately?

The package contains only the 80×25 mm blue ball-bearing fan; mounting screws and any connector adapters are not included and must be sourced separately.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。