暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black 80 by 25 millimetre square case fan with four pin connector

Zyvpee

Zyvpee DS08025T12U P224 80x25mm 4-pin case fan

SKU CH-CP9W-E8FTV

A 12 V ball-bearing case fan measuring 80×25 mm with a 4-pin connector and 0.7 A draw

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeBall
  • Power Connector4 Pin
  • ColorBlack
  • LEDNon-LED
  • Ball bearing for long service life
  • 4-pin PWM control for precise speed adjustment
  • 12 V 0.7 A power draw for efficient operation
  • 80 x 80 x 25 mm fits standard 80 mm mounts
  • Non-LED black frame suits professional builds

80 mm server-grade case fan

The Zyvpee DS08025T12U P224 is an 80 by 25 millimetre case fan built for server and workstation chassis. It runs on a 12 volt supply drawing 0.7 amps through a standard 4 pin PWM connector. The black frame carries no lighting, making it suitable for professional builds where visual distraction is unwanted.

Sustained-load behaviour with ball bearing

A ball bearing motor maintains consistent rotational speed during continuous operation without the wear patterns seen in sleeve designs. The DC square cooler architecture delivers steady airflow across the 80 mm frame even when system temperatures rise. The four wire interface allows the motherboard to modulate speed precisely under prolonged thermal stress.

Straightforward 4 pin installation

The 4 pin connector fits any standard PWM header keyed for 12 volt control, so no adapter cables are required. Mounting holes match the 80 mm square pattern used in most rack and tower cases. Builders should verify that their chassis clearance accommodates the 25 mm thickness, as slimmer bays will not accept this frame.

特長

  • Ball bearing for long service life
  • 4-pin PWM control for precise speed adjustment
  • 12 V 0.7 A power draw for efficient operation
  • 80 x 80 x 25 mm fits standard 80 mm mounts
  • Non-LED black frame suits professional builds

仕様

SeriesDS08025T12U P224
ModelDS08025T12U P224
TypeCase Fan
CompatibilityCase
Bearing TypeBall
Power Connector4 Pin
ColorBlack
LEDNon-LED
FeaturesDC square Cooler
Dimensions80*80*25mm

この商品に関する質問

How much noise and heat does the DS08025T12U P224 produce when running all day?

The 12 V, 0.7 A ball-bearing fan runs continuously in server environments, so sustained operation is within its design limits.

What must I already own to install this 4-pin 80 mm cooler?

A motherboard or fan controller with a standard 4-pin PWM header and an 80 mm mounting location in the case.

Will the DS08025T12U P224 fit alongside older 80 mm fans I want to keep?

Yes — it shares the 80x80x25 mm footprint and 4-pin connector, so it can replace or supplement existing 80 mm units directly.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。