暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

Zyvpee

Zyvpee EFB0412HHD R00 40x40x20mm 3-wire case fan

SKU CH-SCEJ-JWTXA

40×40×20 mm dual-ball-bearing fan runs at 12 V and 0.15 A for H3C 3600, 5600 and S5500 switches

  • TypeCase Fan
  • CompatibilityCase
  • Bearing Type2 Ball
  • Power Connector3 wires
  • ColorBlack
  • LEDNon-LED
  • Designed for H3C 3600 5600 S5500 switches
  • Delta 4020 12 V 0.15 A specification
  • Dual ball bearing for long life
  • Three-wire connector enables speed monitoring
  • Compact 40x40x20 mm black frame

Targeted Switch Cooling

This 40x40x20mm DC12V case fan is built for H3C 3600 5600 S5500 network switches. It draws 0.15A through a 3-wire power connector and uses a 2-ball bearing for reliable airflow in rack-mount chassis.

Direct Delta 4020 Replacement

The EFB0412HHD R00 matches the Delta 4CM 4020 form factor and pin-out, so it slots into the original mounting points without adapters. The jump is worth it when the stock fan develops bearing noise or fails to spin up at 12V.

Compact 3-Wire Integration

The 40mm square frame fits tight switch bays and leaves adjacent slots free for cabling. The 3-wire lead reports speed to the chassis monitor while the 2-ball bearing reduces maintenance compared with sleeve alternatives.

特長

  • Designed for H3C 3600 5600 S5500 switches
  • Delta 4020 12 V 0.15 A specification
  • Dual ball bearing for long life
  • Three-wire connector enables speed monitoring
  • Compact 40x40x20 mm black frame

仕様

SeriesEFB0412HHD R00
ModelEFB0412HHD R00
TypeCase Fan
CompatibilityCase
Bearing Type2 Ball
Power Connector3 wires
ColorBlack
LEDNon-LED
FeaturesDC square Cooler
Dimensions40*40*20mm

この商品に関する質問

Will the 40×40×20 mm frame fit the H3C 3600 5600 S5500 switch chassis?

The 40×40×20 mm dimensions match the Delta 4020 form factor specified for H3C 3600 5600 S5500 switches.

How do I connect the three-wire lead to the switch fan header?

Align the keyed 3-wire connector with the switch fan header pins — red to 12 V, black to ground, yellow to tach — and press straight in.

When should the dual-ball bearing fan be replaced in continuous operation?

Dual-ball bearings typically run 50 000 hours at 40 °C; plan replacement once airflow drops or bearing noise appears.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。