暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black 60mm square case fan 60x10mm three wire 12V .12A

Zyvpee

Zyvpee EFB0612MA 6010 12V .12A 3-wire case fan

SKU CH-X9V9-Q10HW

A 60 mm by 10 mm case fan with ball bearing, 12 V, 0.12 A draw and a three-wire connector

  • TypeCPU Cooler Fan
  • Bearing TypeBall
  • Power Connector3 Wires
  • ColorBlack
  • LEDNon-LED
  • Dimensions60*10mm
  • Compact 60×10 mm design fits tight builds
  • 12 V 0.12 A draws minimal power
  • Ball bearing ensures durable, quiet operation
  • Three-wire connector enables speed monitoring
  • Non-LED black finish suits any colour scheme

Zyvpee EFB0612MA 6010 12V fan

This 60 mm by 10 mm case fan runs on 12 V at 0.12 A and uses a three-wire connector. It is built with a ball bearing for continuous operation. The unit suits compact chassis or CPU coolers that accept a 6010 form factor.

Capacity and headroom

The fan fits 60 mm mounts where space is limited to 10 mm depth. It delivers airflow for low-power processors or auxiliary cooling zones. It will not satisfy high-TDP coolers that demand larger frames or higher static pressure.

Three-wire power connector

The 3-wire lead provides power and a tachometer signal for motherboard monitoring. It does not support PWM speed control, so voltage regulation is required for variable speed. Verify that your header supplies 12 V and reads a third-wire RPM signal.

特長

  • Compact 60×10 mm design fits tight builds
  • 12 V 0.12 A draws minimal power
  • Ball bearing ensures durable, quiet operation
  • Three-wire connector enables speed monitoring
  • Non-LED black finish suits any colour scheme

仕様

Brand3ccooler.com
SeriesEFB0612MA
ModelEFB0612MA
TypeCPU Cooler Fan
Bearing TypeBall
Power Connector3 Wires
ColorBlack
LEDNon-LED
Dimensions60*10mm

この商品に関する質問

Will the 60 mm frame with 10 mm depth and three-wire 12 V connector fit the mounting holes and header on my older motherboard?

The fan measures 60 by 10 mm and uses a standard three-wire 12 V connector, matching the common 6010 mounting pattern found on many legacy boards.

How can I confirm the ball-bearing fan is spinning correctly once installed?

Connect the three-wire lead to a 12 V header; the tachometer wire will report RPM to the BIOS or monitoring software so you can verify operation.

Does the package include mounting screws or a 3-pin-to-4-pin adapter, or must I buy them separately?

Only the 60 mm black non-LED fan with three-wire lead is supplied; screws and any adapter cables are not included.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。