暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

Zyvpee

Zyvpee FBA08T24H 80mm 24V 0.17A 3 Pin Ball Bearing Case Fan

SKU CH-K8Q1-6JKWG

80 mm ball-bearing case fan runs on 24 V at 0.17 A with a three-pin connector and spins below 1600 RPM

  • TypeCase Fan
  • CompatibilityCPU Cooler
  • Bearing TypeBall
  • RPM<1600 RPM
  • Power Connector3 Pin
  • ColorBlack
  • Efficient 24V operation at 0.17A
  • Ball bearing rated for continuous duty
  • Fits 80mm mounts with 15mm depth
  • Runs below 1600 RPM for quiet cooling
  • 3-pin connector enables speed monitoring

80 mm 24 V case fan

The Zyvpee FBA08T24H is an 80 mm square frame fan built for 24 V operation and a three-pin power connector. It uses a ball bearing and spins at up to 1600 RPM while drawing 0.17 A. The black, non-LED housing measures 80 by 80 by 15 mm and is listed as compatible with CPU coolers.

Replaces worn three-pin 24 V fans

This unit serves as a direct swap for an existing 80 mm 24 V three-pin fan that has become noisy or failed. The jump is worth it when the original uses the same voltage, connector and mounting holes and the system does not require PWM speed control.

Suits 24 V industrial or server chassis

Builders maintaining 24 V rack or industrial enclosures that accept 80 mm three-pin fans will find this a matching replacement. Buyers who need PWM control, 12 V operation, LED lighting or a different frame thickness should look elsewhere.

特長

  • Efficient 24V operation at 0.17A
  • Ball bearing rated for continuous duty
  • Fits 80mm mounts with 15mm depth
  • Runs below 1600 RPM for quiet cooling
  • 3-pin connector enables speed monitoring

仕様

BrandZyvpee
SeriesFBA08T24H
ModelFBA08T24H
TypeCase Fan
CompatibilityCPU Cooler
Bearing TypeBall
RPM<1600 RPM
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesCPU Fan
Dimensions80*80*15mm
Package Contentsrefer to title

この商品に関する質問

Will the 80 mm by 80 mm frame with 15 mm depth fit my standard 80 mm fan mounts?

The frame is 80 mm square and 15 mm thick, matching the common 80 mm mounting pattern used on many CPU coolers and case panels.

How do I connect the 3 pin connector to a 24 V source without damaging the fan?

Align the three wires — positive, negative and tachometer — with the corresponding header pins; the keyed connector prevents reverse insertion, but verify the supply is 24 V DC before powering on.

When should I plan to replace the ball bearing fan in continuous 24 V operation?

Ball bearings typically last tens of thousands of hours; monitor for rising noise or RPM dropping below the rated 1600 RPM as signs that replacement is due.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。