暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black 80 by 25 mm case fan with three-pin connector

Zyvpee

Zyvpee KDE1208PTV3 80×25 mm 12 V 3-pin case fan

SKU CH-GX3D-TN6R3

80 mm ball-bearing fan runs up to 1600 RPM on 12 V using a 3-pin connector

  • TypeCPU Cooler Fan
  • CompatibilityCPU Cooler
  • Bearing TypeBall
  • RPM<1600 RPM
  • Power Connector3 Pin
  • ColorBlack
  • Ball-bearing reliability for consistent airflow
  • 12 V, 0.8 W design keeps power draw low
  • 80 × 25 mm frame fits standard 80 mm mounts
  • Three-pin connector enables speed monitoring
  • Sub-1600 RPM operation limits noise output

Zyvpee 80 mm 3-pin case fan

The Zyvpee KDE1208PTV3 is an 80×25 mm case fan that runs on 12 V through a standard 3-pin connector. It is built for builders who need a compact airflow source for tight CPU cooler mounts or small-form-factor chassis.

Ball-bearing thermals and low power draw

A ball bearing keeps friction low while the fan spins below 1600 RPM, producing modest airflow with minimal acoustic profile. The motor is rated at 0.8 W, so it adds very little to the system power budget during normal operation.

Steady output under sustained load

Because the speed ceiling stays under 1600 RPM, the fan maintains a consistent rotational rate without ramping aggressively when temperatures rise. This behaviour suits workloads that run for extended periods rather than short burst scenarios.

特長

  • Ball-bearing reliability for consistent airflow
  • 12 V, 0.8 W design keeps power draw low
  • 80 × 25 mm frame fits standard 80 mm mounts
  • Three-pin connector enables speed monitoring
  • Sub-1600 RPM operation limits noise output

仕様

BrandZyvpee
SeriesKDE1208PTV3
ModelKDE1208PTV3
TypeCPU Cooler Fan
CompatibilityCPU Cooler
Bearing TypeBall
RPM<1600 RPM
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesCPU Cooling Fan
Dimensions80*25MM

この商品に関する質問

How do I install the 3-pin connector on the Zyvpee KDE1208PTV3 and what step do people miss?

Plug the 3-pin header into the motherboard fan socket; the keyed guide pin only fits one way. The step often missed is setting the fan control mode to DC voltage in BIOS so the 12 V fan speed scales correctly.

What maintenance will the Zyvpee KDE1208PTV3 ball bearing fan need later?

The ball bearing is sealed and requires no lubrication. Over time dust builds up on the 80 mm blades; clean with compressed air every few months to keep airflow steady.

At what point does the Zyvpee KDE1208PTV3 hit its limit during sustained use?

The motor is rated below 1600 RPM. Under continuous load the speed ceiling is reached first; the fan cannot spin faster to move more air beyond that limit.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。