暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black 80 by 25 mm case fan with two wires

Zyvpee

Zyvpee MMF-08D24ES RN2 24V 0.16A 80x25mm 2-pin case fan

SKU CH-T4DZ-EVFKH

80×25 mm DC inverter case fan with ball bearing running on 24 V 0.16 A via a 2-pin connector

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeBall
  • Power Connector2 Pin
  • ColorBlack
  • LEDNon-LED
  • Ball bearing for durable operation
  • 24 V 0.16 A input for efficient power use
  • 80 x 25 mm frame fits standard 80 mm mounts
  • Two-pin connector enables simple installation
  • Non-LED black design keeps builds clean

Zyvpee 80 mm 24 V case fan

The Zyvpee MMF-08D24ES RN2 is a 24 V DC inverter fan measuring 80 by 25 mm. It uses a two-pin power connector and a ball bearing for long service life. The black frame has no integrated lighting.

Suits 24 V industrial or server chassis

This fan fits builders who need a compact 24 V cooler for rack enclosures or embedded systems with matching voltage headers. It is not for builders whose boards only provide lower-voltage fan headers, nor for anyone who requires PWM speed control or addressable lighting.

24 V 0.16 A power specification

The unit draws 0.16 A at 24 V, so the power source must supply that exact voltage. Verify the header rating before installation; a mismatched voltage will prevent operation or damage the motor.

特長

  • Ball bearing for durable operation
  • 24 V 0.16 A input for efficient power use
  • 80 x 25 mm frame fits standard 80 mm mounts
  • Two-pin connector enables simple installation
  • Non-LED black design keeps builds clean

仕様

BrandZyvpee
SeriesMMF-08D24ES RN2
ModelMMF-08D24ES RN2
TypeCase Fan
CompatibilityCase
Bearing TypeBall
Power Connector2 Pin
ColorBlack
LEDNon-LED
FeaturesDC Inverter fan
Dimensions80*25mm

この商品に関する質問

Does my case need a 24 V DC supply and a two-pin header to run this fan?

Yes, the fan is rated for 24 V at 0.16 A and uses a simple two-wire connector, so your system must provide a 24 V source with a matching two-pin header.

Will the 80 mm by 25 mm frame line up with the mounting holes on my older 80 mm chassis fan slots?

The fan measures 80 mm square and 25 mm thick, which matches the standard 80 mm mounting pattern used on older cases, so the screw holes should align directly.

How can I confirm the ball-bearing motor is spinning correctly after I install it?

Power the system and listen for smooth, quiet rotation; the ball bearing should run without grinding or rattling, and you should feel a steady airflow from the 80 mm frame.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。