暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black 120mm square DC axial fan, 38mm thick, 2-pin power connector

Zyvpee

Zyvpee MMF-12D24DS-RN3 120mm 38mm 24V .36A 2 Pin case fan

SKU CH-WJNP-ZJSEZ

A 120mm thick 38mm case fan with dual ball bearings and a 2-pin 24V .36A connection for industrial PLC equipment

  • TypeCase Fan
  • CompatibilityCase
  • Bearing Type2 Ball
  • Power Connector2 Pin
  • ColorBlack
  • LEDNon-LED
  • 24 V operation powers industrial PLC and inverter equipment
  • Dual ball bearing extends service life in continuous duty cycles
  • 120 mm square frame fits standard 120 mm mounting patterns
  • 38 mm thick profile moves more air than slim alternatives
  • Two pin connector simplifies wiring into existing control panels

Industrial 24 V 120 mm axial fan

This 120 mm by 38 mm DC axial fan runs on 24 V and draws 0.36 A through a two-pin connector. It uses a dual-ball bearing for continuous operation in industrial enclosures. The black frame measures 120 mm square and 38 mm deep. It is built for PLC and inverter cabinets such as ABB and Yaskawa devices.

Suits 24 V control cabinets not PWM motherboards

Engineers maintaining 24 V automation gear will find the voltage and pinout match existing wiring. Builders who need a 12 V PWM fan for a desktop motherboard cannot use this unit. Buyers who require variable speed control via a four-pin header should look elsewhere.

Key spec is the 24 V two-pin power input

The 24 V 0.36 A two-pin connection decides whether the fan fits the target circuit. A 12 V header will not start the motor and a four-pin header cannot drive it. Verify the supply voltage and connector before ordering.

特長

  • 24 V operation powers industrial PLC and inverter equipment
  • Dual ball bearing extends service life in continuous duty cycles
  • 120 mm square frame fits standard 120 mm mounting patterns
  • 38 mm thick profile moves more air than slim alternatives
  • Two pin connector simplifies wiring into existing control panels

仕様

SeriesMMF-12D24DS-RN3
ModelMMF-12D24DS-RN3
TypeCase Fan
CompatibilityCase
Bearing Type2 Ball
Power Connector2 Pin
ColorBlack
LEDNon-LED
FeaturesDC axial fan
Dimensions120mm*120mm*38mm

この商品に関する質問

Does the 120mm by 38mm frame fit a standard 120mm case opening?

Yes, the fan measures 120mm square by 38mm thick, matching the common 120mm mounting holes used in PC cases.

How do I connect the 2 pin power connector to a 24V supply without damaging the fan?

Wire the two leads directly to a 24V DC source observing polarity; the fan draws 0.36A and has no PWM or speed-control wire.

When should I plan to replace the 2 ball bearing assembly?

The dual ball bearing design typically lasts several years of continuous operation; replace the fan when noise or vibration increases noticeably.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。