暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

Zyvpee

Zyvpee V80E12BS2A5-57 80x38mm 4 Pin DC 12V 1.95A case fan

SKU CH-N3TX-H5536

80 mm case fan with 38 mm depth, ball bearing and 4-pin DC 12 V 1.95 A power for server cooling

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeBall
  • Power Connector4 Pin
  • ColorBlack
  • LEDNon-LED
  • High airflow from 12 V 1.95 A motor
  • Ball bearing ensures long service life
  • 80 × 38 mm fits standard server bays
  • 4-pin PWM connector enables precise speed control
  • Non-LED black frame keeps build clean

Zyvpee V80E12BS2A5-57 80mm Server Case Fan

This Zyvpee case fan is an 80mm by 38mm unit built around a Nidec motor and a ball bearing. It runs on 12V DC drawing 1.95A through a standard 4-pin power connector. The black, non-LED frame is designed for server chassis and other enclosures that require a square DC cooler in this form factor.

Suited for 12V 4-pin server bays needing 38mm depth

Builders fitting a 12V 4-pin slot with an 80mm mount and 38mm clearance will find the electrical and mechanical match they need. Buyers whose chassis only accept a thinner frame or a different voltage should look at other options, as this unit fixes both the depth and the power specification.

38mm frame depth decides fit in 80mm bays

The single specification that determines whether this fan fits is the 38mm frame depth; many 80mm bays are limited to slimmer profiles. Verify the available depth before ordering, because the 80mm width and 4-pin connector alone do not guarantee compatibility.

特長

  • High airflow from 12 V 1.95 A motor
  • Ball bearing ensures long service life
  • 80 × 38 mm fits standard server bays
  • 4-pin PWM connector enables precise speed control
  • Non-LED black frame keeps build clean

仕様

SeriesV80E12BS2A5-57
ModelV80E12BS2A5-57
TypeCase Fan
CompatibilityCase
Bearing TypeBall
Power Connector4 Pin
ColorBlack
LEDNon-LED
FeaturesDC square Cooler
Dimensions80*80*38mm

この商品に関する質問

How much current does the 12 V fan draw when running continuously?

The fan is rated at 1.95 A at 12 V, so the motherboard header or fan controller must supply at least that much current.

What power connector must my motherboard or controller provide for this fan?

It uses a standard 4‑pin PWM connector, so a 4‑pin fan header is required for speed control and monitoring.

Will the 80 mm by 38 mm frame fit in the same mounting holes as my existing 80 mm fans?

Yes, the 80 mm square frame with 38 mm depth matches the common 80 mm mounting pattern used by older case fans.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。