OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
A-Tech
4GB DDR3 1066MHz ECC unbuffered DIMM module for server memory upgrades
This 4GB DDR3 module runs at 1066MHz with PC3-8500 timing and CL3 latency. It operates at the standard 1.5V and uses an unbuffered ECC design with a 2Rx8 rank configuration. The 240-pin DIMM is built as a direct replacement for the Crucial CT51272BA1067 part number.
It fits servers and workstations that accept DDR3 ECC unbuffered memory at this speed and voltage. Systems requiring registered or load-reduced modules cannot use this stick. Builders needing higher capacities or faster DDR3 speeds should look at other modules.
The module maintains its rated 1066MHz frequency and CL3 timings during extended workloads thanks to standard-voltage operation and ECC error correction. Unbuffered architecture keeps latency consistent without the added register cycle of registered memory.
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Crucial |
| Model | CT51272BA1067 |
| Capacity | 4GB |
| Speed | DDR3 1066 (PC3 8500) |
| CAS Latency | CL3 |
| Voltage | 1.50V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Features | CT51272BA1067 |
Yes, this module uses the 240-pin DDR3 DIMM form factor and requires a motherboard with matching DDR3 slots.
The system will run all modules at the speed and timings of the slowest stick, so slower DDR3 will work but overall bandwidth drops.
Check the BIOS or UEFI memory information screen — it should report ECC enabled and show the module running at 1066 MHz with CL3 timings.
이 진열대의 다른 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
결제할 코인과 가격을 확인할 통화입니다.
체크아웃 시 지갑에서 전송됩니다.
표시 전용 — 카탈로그 가격은 달러 기준입니다.
일치하는 통화가 없습니다.
사이트에서 사용할 언어를 선택하십시오.
처음 방문하셨나요?
이미 계정이 있으신가요?
자동 재설정 기능은 없습니다. 이 쇼핑몰은 어떠한 메일도 보내지 않으므로 요청할 일회용 링크 자체가 없습니다. 계정에 등록된 이메일 주소를 그대로 두시면 담당자가 직접 확인해 처리합니다.
요청 접수
받은편지함으로 오는 것은 아무것도 없습니다 — 이 쇼핑몰은 메일을 전혀 보내지 않습니다. 담당자가 직접 확인해 처리합니다.
기억나셨나요?