저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Green rectangular DDR3 DIMM module with black memory chips and gold edge connectors

A-Tech

A-Tech 4GB DDR3 1333MHz ECC RDIMM 2Rx8 server RAM

SKU CH-2DJV-9BG8Z

4 GB DDR3 1333 MHz ECC registered server DIMM with 2Rx8 organisation and 1.5 V operation

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC protection guards data integrity with registered DDR3 design
  • 1333 MHz speed and CL9 latency deliver responsive server performance
  • 5 V standard voltage ensures broad DDR3 platform compatibility
  • 2Rx8 organisation on 240-pin DIMM fits registered memory slots
  • Direct replacement for Micron MT18JSF51272PDZ-1G4D1DD and MT18JDF51272PDZ-1G4D1AD

Server memory upgrade

This 4GB DDR3 1333MHz ECC registered DIMM is built for server and workstation platforms that require error-correcting registered memory. It operates at 1.5V standard voltage with CL9 latency and uses a 2Rx8 rank configuration on Micron chipset. The module is a compatible replacement for Micron MT18JSF51272PDZ-1G4D1DD and MT18JDF51272PDZ-1G4D1AD part numbers.

Replaces specific Micron modules

It directly substitutes the listed Micron 4GB DDR3 1333MHz ECC RDIMM parts when a matching capacity, speed, voltage and registered ECC specification are required. The upgrade is worthwhile when your system documentation confirms support for 2Rx8 registered DIMMs at PC3-10600 speed and you need to replace a failed module or add capacity within the same memory channel configuration.

Verify platform requirements first

Before ordering, confirm that your server or workstation motherboard accepts DDR3 240-pin registered ECC DIMMs at 1333MHz with 1.5V operation and 2Rx8 organisation. Check the system manual or vendor memory-qualified list for maximum module capacity per slot, total supported memory and whether mixed-rank populations are allowed. This module is not suitable for platforms that require unbuffered non-ECC memory or a different DDR generation.

주요 특징

  • ECC protection guards data integrity with registered DDR3 design
  • 1333 MHz speed and CL9 latency deliver responsive server performance
  • 5 V standard voltage ensures broad DDR3 platform compatibility
  • 2Rx8 organisation on 240-pin DIMM fits registered memory slots
  • Direct replacement for Micron MT18JSF51272PDZ-1G4D1DD and MT18JDF51272PDZ-1G4D1AD

사양

BrandA-Tech
SeriesCompatible Replacement for Micron
ModelMT18JSF51272PDZ-1G4D1DD, MT18JDF51272PDZ-1G4D1AD
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMicron Chipset
FeaturesMT18JSF51272PDZ-1G4D1DD, MT18JDF51272PDZ-1G4D1AD

이 상품에 대한 질문

Will the 240-pin DDR3 DIMM fit my server's memory slots?

Yes, this module uses the standard 240-pin DDR3 DIMM form factor required by compatible server and workstation motherboards.

What is the correct way to seat this registered ECC module so the system recognises it?

Align the notch with the slot key, press firmly until both side clips click shut, and ensure all modules match in speed and rank for the memory controller to initialise correctly.

When should I expect to replace this 4GB DDR3 RDIMM?

DDR3 server memory has no scheduled replacement interval; swap it only if diagnostics report correctable ECC errors rising or the module fails memory testing.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.