EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
A-Tech
An 8 GB DDR4 module running at 2933 MHz with a 1.20 V standard voltage fits 288-pin desktop DIMM slots
This single 8GB DDR4 module runs at 2933MHz with a standard 1.20V operating voltage. It is built for desktop systems that accept 288-pin unbuffered non-ECC memory. The stick serves owners who want a straightforward capacity increase for everyday workloads.
The module uses the standard 288-pin DIMM form factor and unbuffered non-ECC architecture. It slots directly into compatible desktop motherboards without requiring registered or error-correcting support. Installation follows the usual DIMM alignment and latch process.
The DDR4 2933 interface caps transfer rates at the PC4-23400 specification and operates at 1.20V. Systems limited to lower DDR4 speeds will downclock the module automatically. Builds that need ECC, registered signalling, or speeds beyond 2933MHz cannot use this module.
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Speed | DDR4 2933 (PC4 23400) |
| Tested Frequency | 2933 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Recommend Use | AMD & Intel Compatible |
The PC4-23400 label indicates the module is rated for DDR4 2933 operation at 1.20V, matching the JEDEC standard for this speed grade.
The module uses the standard 288-pin DDR4 DIMM form factor, so it fits any desktop board with DDR4 DIMM slots.
Align the notch on the module with the slot key, press down firmly until both side clips click shut, then verify the capacity appears in BIOS.
이 진열대의 다른 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
결제할 코인과 가격을 확인할 통화입니다.
체크아웃 시 지갑에서 전송됩니다.
표시 전용 — 카탈로그 가격은 달러 기준입니다.
일치하는 통화가 없습니다.
사이트에서 사용할 언어를 선택하십시오.
처음 방문하셨나요?
이미 계정이 있으신가요?
자동 재설정 기능은 없습니다. 이 쇼핑몰은 어떠한 메일도 보내지 않으므로 요청할 일회용 링크 자체가 없습니다. 계정에 등록된 이메일 주소를 그대로 두시면 담당자가 직접 확인해 처리합니다.
요청 접수
받은편지함으로 오는 것은 아무것도 없습니다 — 이 쇼핑몰은 메일을 전혀 보내지 않습니다. 담당자가 직접 확인해 처리합니다.
기억나셨나요?