저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Clear flexible PVC tubing 8 mm ID 11 mm OD 3 m coil

Alphacool

Alphacool 17492 AlphaTube HF liquid cooler tubing 8 mm ID 11 mm OD 3 m clear

SKU CH-6G29-A4EEM MPN 17492

Clear PVC tubing with 8 mm inner and 11 mm outer diameter, 3 m length, resists kinking and handles -10 to 80 °C at 2 bar working pressure

  • ColorClear
  • FeaturesThe AlphaTube HF tubing has the perfect flexibility to be ea
  • Installs easily thanks to flexible PVC that resists kinking
  • Clear 8 mm ID and 11 mm OD dimensions fit standard fittings
  • Three-metre length covers most custom loop layouts
  • Operates reliably from -10 °C to 80 °C working temperature
  • Withstands 8 bar burst pressure for system safety

AlphaTube HF clear PVC tubing 8 mm ID 11 mm OD

This Alphacool AlphaTube HF is a clear PVC tube made for custom water-cooling loops. Its 8 mm inner diameter and 11 mm outer diameter suit standard push-fit or compression fittings. The three metre length gives enough run for most single-loop builds. It arrives new and ready to cut to length.

Working limits of the PVC material

The tube is rated for a working pressure of 2 bar and a burst pressure of 8 bar. Its hardness falls between 65 and 70 A-Shore, balancing flexibility with kink resistance. Operating temperature spans -10 °C to 80 °C, covering typical coolant ranges. Exceeding these pressures or temperatures can cause deformation or rupture.

Installation notes and common pitfalls

The tubing cuts cleanly with a sharp blade and slides over barbed or compression fittings without excessive force. Warm water can soften it for tight bends, but overheating risks permanent distortion. The main errors are cutting lengths too short, leaving no slack for component movement, and skipping fitting inserts that prevent collar crush.

주요 특징

  • Installs easily thanks to flexible PVC that resists kinking
  • Clear 8 mm ID and 11 mm OD dimensions fit standard fittings
  • Three-metre length covers most custom loop layouts
  • Operates reliably from -10 °C to 80 °C working temperature
  • Withstands 8 bar burst pressure for system safety

사양

BrandAlphacool
ModelMBVB08N416CT1
ColorClear
FeaturesThe AlphaTube HF tubing has the perfect flexibility to be easily installed. It is flexible enough to be laid without effort, but at the same time rigid enough that it will not kink easily, even with tighter bending radii.

이 상품에 대한 질문

Should I choose the 8 mm inner diameter or the 11 mm outer diameter for my fittings?

Both figures describe the same tube: 8 mm is the bore that carries coolant, 11 mm is the outside wall that the compression fitting seals against. You need fittings rated for 8 mm ID / 11 mm OD.

What does the 2 bar working pressure mean once the loop is running?

It limits the continuous pressure the pump can generate to roughly 2 bar; above that the tubing may deform or leak, so set pump speed and reservoir height to stay below this value.

How does the 65-70 A-Shore hardness affect bending in a real build?

The mid-range PVC hardness keeps the tube pliable enough for tight bends without heat, yet stiff enough to resist kinking when routed around GPU blocks and radiator ports.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.