저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Black flexible PVC tubing coil 10mm ID 13mm OD 3m length

Alphacool

Alphacool AlphaTube HF 10/13mm UV Black 3m PVC Tubing

SKU CH-HN0K-F8CG4

UV-reactive black PVC tubing with 10 mm inner and 13 mm outer diameter, rated to 80 °C and 18 bar burst pressure, supplied in a 3 m length

  • TypeTubing

Color Black

  • UV-reactive black tubing highlights custom loop aesthetics
  • 10 mm inner diameter and 13 mm outer diameter fit standard compression fittings
  • Three metre length provides ample tubing for full system runs
  • PVC construction rated from minus ten to eighty degrees Celsius covers extreme coolant temperatures
  • Sixty-five to seventy Shore A hardness balances easy bending with kink resistance

Tubing for custom water loops

Alphacool AlphaTube HF provides a 3 m length of PVC tubing with a 10 mm inner diameter and 13 mm outer diameter. The UV Black finish reacts under ultraviolet light for visual effect. It is intended for builders assembling custom liquid cooling circuits who need a flexible conduit between blocks, radiators, pumps and reservoirs. The material operates reliably from -10 °C to 80 °C.

Flexible PVC with kink resistance

A hardness rating of 65-70 A-Shore gives the tube enough rigidity to resist collapsing on tight bends while remaining pliable for routing around components. The 13 mm outer diameter fits standard 13 mm compression fittings without adapters. Rated for a working pressure of 3 bar and a burst pressure of 18 bar, the tubing handles typical loop pressures with a wide safety margin. The 3 m roll allows multiple cut lengths for complex routing.

Replaces aged or mismatched tubing

This roll suits builders refreshing a loop where old tubing has clouded, stiffened or discoloured, or anyone moving from smaller-bore hose to a 10 mm ID for higher flow. The jump is worth it when the existing tubing shows surface degradation, when a colour change is desired, or when a longer continuous run is needed without splices. It does not suit builds requiring hard-line acrylic or PETG tubing, nor loops designed for smaller 8 mm ID fittings.

주요 특징

  • UV-reactive black tubing highlights custom loop aesthetics
  • 10 mm inner diameter and 13 mm outer diameter fit standard compression fittings
  • Three metre length provides ample tubing for full system runs
  • PVC construction rated from minus ten to eighty degrees Celsius covers extreme coolant temperatures
  • Sixty-five to seventy Shore A hardness balances easy bending with kink resistance

사양

TypeTubing

이 모델의 다른 버전

같은 라인업에서 4개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

What tube size does the Alphacool AlphaTube HF 10/13mm use for fittings?

It has a 10 mm inner diameter and 13 mm outer diameter, so it fits standard 10/13 mm compression or barbed fittings.

What clearance does the 3-metre length and 13 mm outer diameter need inside a case?

The tubing occupies a 13 mm circle per run; allow extra length for gentle curves and keep bends above the minimum radius to prevent kinking.

How is the tubing installed and what step avoids leaks?

Cut the PVC cleanly, slide the fitting nut and olive onto the tube, push the tube fully onto the barb until it seats against the shoulder, then tighten the compression nut by hand plus a quarter turn with a spanner.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.