BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
ASUS
16 GB GDDR7 on a 256-bit bus with 8960 CUDA cores, PCIe 5.0 x16, HDMI 2.1b and DisplayPort 2.1b for 7680 × 4320 across four monitors
The ASUS TUF Gaming GeForce RTX 5070 Ti OC Edition uses the Blackwell architecture with 8960 CUDA cores and 16GB of GDDR7 memory on a 256-bit bus. It connects through a PCI Express 5.0 x16 interface and reaches an effective memory clock of 28 Gbps. The card supports DirectX 12 Ultimate and OpenGL 4.6 for modern rendering workloads.
This card suits builders who want 4K-capable performance and DLSS 4.0 support on a PCIe 5.0 motherboard. Its four-display outputs — two HDMI 2.1b and three DisplayPort 2.1b — drive up to 7680 x 4320 resolution across multiple monitors. Users on older PCIe 4.0 or 3.0 platforms will not saturate the link bandwidth. Systems without adequate case clearance or power delivery should consider a smaller or lower-power alternative.
The bundled I/O bracket provides two HDMI 2.1b ports and three DisplayPort 2.1b ports, enabling four simultaneous displays at high refresh rates. This native connectivity removes the need for active adapters when driving modern 4K or 8K panels. Driver support for DLSS 4.0 and the Blackwell feature set is delivered through standard NVIDIA Game Ready or Studio branches, so no extra software installation is required beyond the usual driver package.
| Brand | ASUS |
|---|---|
| Series | TUF Gaming |
| Model | TUF-RTX5070TI-O16G-GAMING |
| Interface | PCI Express 5.0 x16 |
| Chipset Manufacturer | NVIDIA |
| GPU Series | NVIDIA GeForce RTX 50 Series |
| GPU | GeForce RTX 5070 Ti |
| Architecture | Blackwell |
| CUDA Cores | 8960 |
| Effective Memory Clock | 28 Gbps |
| Memory Size | 16GB |
| Memory Interface | 256-Bit |
| Memory Type | GDDR7 |
| DirectX | DirectX 12 Ultimate |
| OpenGL | OpenGL 4.6 |
| Multi-Monitor Support | 4 |
| HDMI | 2 x HDMI 2.1b |
| DisplayPort | 3 x DisplayPort 2.1b |
| Max Resolution | 7680 x 4320 |
| CrossFireX Support | No |
| SLI Support | No |
| Cooler | Triple Fans |
| Thermal Design Power | 300W |
| Recommended PSU Wattage | 850W |
| HDCP Ready | Yes |
| Form Factor | ATX |
| Max GPU Length | 330 mm |
| Card Dimensions (L x H) | 12.95 x 5.51 x 2.46 inch |
| Slot Width | 3.125 Slot |
| Package Contents | 1 x Speedsetup Manual 1 x TUF Graphics Card Holder 1 x TUF Velcro Hook & Loop 1 x TUF Magnet 1 x TUF Gaming Certificate 1 x Thank You Card 1 x Adpater Cable (1 to 3) |
Yes, the PCIe 5.0 x16 interface is backward compatible with PCIe 4.0 slots, so the card will operate at PCIe 4.0 speeds without any extra configuration.
The card provides 2 x HDMI 2.1b and 3 x DisplayPort 2.1b outputs; both standards are backward compatible, so older HDMI 2.0 and DisplayPort 1.4 monitors will work normally.
Open NVIDIA Control Panel → System Information; the GPU entry will list 8960 CUDA cores and 16 GB GDDR7 memory, confirming the hardware is detected correctly.
이 진열대의 다른 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
결제할 코인과 가격을 확인할 통화입니다.
체크아웃 시 지갑에서 전송됩니다.
표시 전용 — 카탈로그 가격은 달러 기준입니다.
일치하는 통화가 없습니다.
사이트에서 사용할 언어를 선택하십시오.
일치하는 언어가 없습니다.
처음 방문하셨나요?
이미 계정이 있으신가요?
자동 재설정 기능은 없습니다. 이 쇼핑몰은 어떠한 메일도 보내지 않으므로 요청할 일회용 링크 자체가 없습니다. 계정에 등록된 이메일 주소를 그대로 두시면 담당자가 직접 확인해 처리합니다.
요청 접수
받은편지함으로 오는 것은 아무것도 없습니다 — 이 쇼핑몰은 메일을 전혀 보내지 않습니다. 담당자가 직접 확인해 처리합니다.
기억나셨나요?