저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인

BGears

BGears b-BlasterPWM 120x38 case fan 38mm 1300-6500 RPM 318 CFM

SKU CH-8A2N-CRBYQ MPN b-BlasterPWM 120x38

A 120 mm case fan with 38 mm thickness moves up to 318 CFM at speeds from 1300 to 6500 RPM

  • Fan Counts1 Fan
  • TypeCase Fan
  • Fan Size120mm x 38mm
  • Fan Thickness38mm
  • Bearing Type2 Ball (Japanese ball bearing)
  • RPM1300 to 6500RPM±10%
  • Japanese dual ball bearing extends service life
  • 6500 RPM maximum speed pushes 318 CFM airflow
  • 38 mm thick frame fits high-static-pressure builds
  • PWM 4-pin control spans 1300 to 6500 RPM
  • Certified to UL, FCC, CE, RoHS, WEEE, REACH standards

High-Speed 120mm PWM Case Fan

The BGears b-BlasterPWM 120x38 is a single 120mm by 38mm case fan built for systems that demand very high airflow. It uses a Japanese dual ball bearing and a 4-pin PWM connector for automatic speed control via the motherboard.

30-Watt Power Draw at Peak Speed

Running at the top of its 1300 to 6500 RPM range, the fan draws 2.5 amps at 12 VDC for a total of 30 watts. The motherboard fan header must be rated to supply this current without tripping its protection circuit.

318 CFM Maximum Airflow

At 6500 RPM the fan moves 318 CFM while producing a noise level of 64 dBA. This output suits dense radiators or restricted chassis paths where static pressure matters more than silence.

주요 특징

  • Japanese dual ball bearing extends service life
  • 6500 RPM maximum speed pushes 318 CFM airflow
  • 38 mm thick frame fits high-static-pressure builds
  • PWM 4-pin control spans 1300 to 6500 RPM
  • Certified to UL, FCC, CE, RoHS, WEEE, REACH standards

사양

BrandBgears
SeriesB-Blaster
Model120x38
Part Numberb-BlasterPWM 120x38
Fan Counts1 Fan
TypeCase Fan
Fan Size120mm x 38mm
Fan Thickness38mm
Bearing Type2 Ball (Japanese ball bearing)
RPM1300 to 6500RPM±10%
Air Flow318
Noise Level64
Power ConnectorMini 4 pin 4 wires
ColorBlack
배송 무게0.13 kg
포장 크기130 × 130 × 39 mm

이 상품에 대한 질문

Should I pick the 1300 RPM low end or the 6500 RPM high end for a radiator push-pull setup?

The fan runs from 1300 to 6500 RPM with PWM control, so the motherboard chooses speed based on temperature. At 6500 RPM it delivers 318 CFM at 64 dBA; at 1300 RPM airflow and noise drop proportionally.

What does the 318 CFM figure mean once the fan is mounted on a radiator?

318 CFM is the free-air maximum at 6500 RPM. On a radiator the static pressure of the 38 mm thick frame keeps flow higher than thinner fans, but actual airflow will be lower than the free-air rating.

The 4-pin PWM connector is standard, but what does the 2.5 A current draw cap in practice?

At 12 V the fan draws 2.5 A (30 W). Most motherboard headers are rated for 1 A, so you need a powered fan hub or a high-current header to run it at full speed.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.