저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Black mid-tower ATX case with tinted tempered glass side panel and ARGB front lighting

BGears

BGears Vortex RGB Black Middle Tower ATX PC Case

SKU CH-YMSP-WK1SW

A mid-tower ATX case with a hinged tinted tempered-glass side panel, ARGB lighting and room for a 360 mm front radiator, 320 mm GPU and 165 mm CPU cooler

  • TypeMiddle Tower ATX
  • ColorBlack
  • With Power SupplyNo
  • Motherboard CompatibilityATX / E-ATX / Micro ATX / Mini ITX
  • Side Panelwith Side Window
  • LEDARGB
  • Supports E-ATX, ATX, Micro-ATX and Mini-ITX motherboards for broad build flexibility
  • ARGB lighting with mirror front panel creates vivid illumination effects
  • Front radiator support up to 360 mm enables high-capacity liquid cooling
  • Hinged tinted tempered glass side door provides easy interior access
  • Fits graphics cards up to 320 mm and CPU coolers up to 165 mm

Middle Tower ATX Compatibility

This middle tower ATX case supports ATX, E-ATX, Micro ATX and Mini ITX motherboards. Internal dimensions measure 335 by 210 by 468 millimetres while overall dimensions are 380 by 210 by 480 millimetres. A door hinge tinted tempered glass side panel provides a view of the build.

Clearance and Port Check

Verify that your graphics card does not exceed 320 millimetres in length and that your CPU cooler is no taller than 165 millimetres. The front panel supplies one USB 3.0 port, two USB 2.0 ports and two audio jacks. Ensure your power supply matches the standard ATX length allowance.

Build Quality and Daily Use

The chassis features a .5 millimetre black interior with a front panel combining ABS, acrylic and mirror LED elements controlled via ARGB. A single 120 millimetre fan is included and mounting points accept up to three 120 or 140 millimetre fans at the front, two at the top and one at the rear. Radiator support extends to 360 millimetres at the front, 240 millimetres at the top and 120 millimetres at the rear. Four 3.5 inch and two 2.5 inch drive bays plus seven expansion slots complete the internal layout.

주요 특징

  • Supports E-ATX, ATX, Micro-ATX and Mini-ITX motherboards for broad build flexibility
  • ARGB lighting with mirror front panel creates vivid illumination effects
  • Front radiator support up to 360 mm enables high-capacity liquid cooling
  • Hinged tinted tempered glass side door provides easy interior access
  • Fits graphics cards up to 320 mm and CPU coolers up to 165 mm

사양

BrandBgears
SeriesVortex
TypeMiddle Tower ATX
ColorBlack
With Power SupplyNo
Motherboard CompatibilityATX / E-ATX / Micro ATX / Mini ITX
Side Panelwith Side Window
LEDARGB
Dust FiltersTop
Internal 3.5" Drive Bays4
Internal 2.5" Drive Bays2
Expansion Slots7
Front Ports1 x USB 3.0, 2 x USB 2.0, 2 x Audio
Fan OptionsFront - 3 x 120mm / Front - 3 x 140mm / Rear - 1 x 120mm / Top - 2 x 120mm / Top - 2 x 140mm
Radiator OptionsFront - Up to 360mm / Rear - Up to 120mm / Top - Up to 240mm
120mm Fans1
Max GPU Length320 mm
Max CPU Cooler Height165 mm
Max PSU LengthStandard ATX
배송 무게8.62 kg
포장 크기533 × 406 × 254 mm

이 상품에 대한 질문

Will a 320 mm graphics card fit without removing drive cages?

The case supports GPUs up to 320 mm in length. Internal 3.5 inch bays are mounted separately, so a full-length card clears them without cage removal.

What radiator sizes can I install in the front and top?

The front accepts radiators up to 360 mm. The top supports up to 240 mm. Both positions also allow 120 mm or 140 mm fans in dual or triple layouts.

Does the case include enough fans for a basic build?

One 120 mm fan is pre-installed. You can add up to three 120 mm or 140 mm fans at the front, one 120 mm at the rear, and two 120 mm or 140 mm fans at the top.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.