Zyvpee DBTB0838B2S 80mm case fan 12V 2.1A 4-wire 7000 RPM 80 CFM 50 dBA 80x76mm
- Case Fan
- Case
Bitspower
PWM-controlled D5-style pump delivers up to 960 L/h at 12 V and 17 W, with a 50 000-hour MTBF and 60 °C max fluid temperature
The Bitspower S1 Pump PWM is a 12 V DC liquid-cooling pump rated for 17 W power draw. It delivers a maximum flow of 960 L/h and supports PWM speed control. The unit measures 62x62x37 mm and carries a 50 000-hour MTBF rating.
This pump suits builders assembling custom water-cooling loops who want PWM-regulated flow. It is not for users requiring flow beyond 960 L/h or system temperatures above 60 °C. Buyers needing a different form factor or voltage should look elsewhere.
At 960 L/h the pump comfortably circulates coolant through typical CPU and GPU blocks with standard tubing runs. Headroom diminishes when multiple restrictive blocks, long tubing lengths or high-resistance radiators are added. The 60 °C fluid-temperature limit also caps use in extreme heat-load scenarios.
| Type | Pump |
|---|
The pump runs on 12V DC and draws 17W, so a standard 12V rail or PWM header on the motherboard can supply it.
Yes, the 62x62x37mm dimensions match the mounting pattern of all compatible reservoirs in the list.
Check the PWM signal in BIOS or monitoring software to ensure it reaches maximum duty cycle and listen for steady operation up to the 960L/h flow rating.
이 진열대의 다른 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
결제할 코인과 가격을 확인할 통화입니다.
체크아웃 시 지갑에서 전송됩니다.
표시 전용 — 카탈로그 가격은 달러 기준입니다.
일치하는 통화가 없습니다.
사이트에서 사용할 언어를 선택하십시오.
처음 방문하셨나요?
이미 계정이 있으신가요?
자동 재설정 기능은 없습니다. 이 쇼핑몰은 어떠한 메일도 보내지 않으므로 요청할 일회용 링크 자체가 없습니다. 계정에 등록된 이메일 주소를 그대로 두시면 담당자가 직접 확인해 처리합니다.
요청 접수
받은편지함으로 오는 것은 아무것도 없습니다 — 이 쇼핑몰은 메일을 전혀 보내지 않습니다. 담당자가 직접 확인해 처리합니다.
기억나셨나요?