Brute Networks
Brute Networks 8GB DDR4-3200 1Rx8 Registered ECC server RAM
8GB registered ECC DDR4-3200 module with 1Rx8 organisation for HPE-compatible servers
- Capacity8GB
- Type288-Pin DDR4 SDRAM
- SpeedDDR4 3200 (PC4 25600)
- Voltage1.20V
- ECCYes
- Buffered/RegisteredRegistered
- 8GB capacity expands server memory headroom
- DDR4-3200 speed delivers 25600 MT/s data rates
- Registered ECC design corrects single-bit errors automatically
- 20V operation reduces power draw per module
- 100% HPE compatible validated for P07638-B21 systems
HPE-compatible 8 GB DDR4-3200 module
This registered ECC module matches HPE part number P07638-B21 and runs at 3200 MT/s with a 1.20 V supply. It uses a 1Rx8 organisation on a 288-pin DDR4 SDRAM PCB built from major-brand chips. The stick is designed for servers that require registered memory with error correction.
Upgrade from non-ECC or slower DDR4
The jump is worth it when the platform demands registered ECC DDR4-3200 and the existing slots are populated with unbuffered or lower-speed modules. Compatibility is validated at 100 % so the factory warranty remains intact. Buyers who need unbuffered memory or a different voltage cannot use this module.
Sustained load behaviour
Registered buffering reduces electrical load on the memory controller during continuous operation. ECC corrects single-bit errors in real time without halting the system. The 1.20 V rating keeps power draw stable across extended workloads. Systems that exceed the registered ECC requirement will not benefit from the extra circuitry.
주요 특징
- 8GB capacity expands server memory headroom
- DDR4-3200 speed delivers 25600 MT/s data rates
- Registered ECC design corrects single-bit errors automatically
- 20V operation reduces power draw per module
- 100% HPE compatible validated for P07638-B21 systems
사양
| Brand | HPE |
|---|---|
| Capacity | 8GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 3200 (PC4 25600) |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | Major Brand Chipset |
이 상품에 대한 질문
Will the 288-pin DDR4 module fit my server's DIMM slots?
The module uses the standard 288-pin DDR4 form factor and 1.2 V operation, so it fits any server slot designed for registered DDR4-3200 memory.
Do I need to populate specific slots first when installing this 1Rx8 registered ECC stick?
Install the module in the slot sequence recommended by your server's manual — typically the lowest-numbered channel slot — and ensure the retention clips click fully closed.
How long will the major-brand chips (Samsung, SK Hynix or Micron) last before needing replacement?
The modules carry a lifetime warranty and are validated for continuous server operation, so replacement is only needed if a fault develops or capacity requirements grow.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.



