Computer Memory Solutions
Computer Memory Solutions 16GB (2x8GB) DDR3 1333MHz CL9 1.5V 240-pin DIMM for HP Pro 4300 SFF
16 GB DDR3-1333 kit upgrades HP Pro 4300 SFF desktops with two 8 GB modules
- Capacity16GB (2 x 8GB)
- Type240-Pin DDR3 SDRAM
- SpeedDDR3 1333 (PC3 10600)
- CAS LatencyCL9
- Timing9-9-9
- Voltage1.5V
- 16 GB dual-channel kit doubles capacity for HP Pro 4300 SFF
- DDR3 1333 MHz CL9 timing matches system spec for stable operation
- 5 V unbuffered non-ECC DIMMs install without voltage changes
- 240-pin 2Rx8 modules fit the two available memory slots
- Major-brand chipset and lifetime warranty ensure long-term reliability
Targeted upgrade for HP Pro 4300 SFF
This 16GB kit contains two 8GB DDR3 1333MHz DIMMs built specifically for the HP Pro 4300 SFF desktop. It fills both memory slots to reach the system's maximum supported capacity. The modules are unbuffered, non-ECC and run at 1.5V with CL9 timings. Buyers needing ECC error correction or registered modules cannot use this kit.
Thermals noise and power draw
Standard DDR3 voltage of 1.5V keeps power consumption within the platform's original design envelope. No heat spreaders are fitted, so the modules rely on the chassis airflow already present in the small form factor case. Operation is silent because there are no moving parts on the memory itself.
What the bundle changes
The package supplies two matched sticks so dual-channel mode works immediately after installation. A limited lifetime warranty against manufacturing defects is included when purchased directly from Computer Memory Solutions. The kit eliminates the guesswork of mixing modules from different production lots.
주요 특징
- 16 GB dual-channel kit doubles capacity for HP Pro 4300 SFF
- DDR3 1333 MHz CL9 timing matches system spec for stable operation
- 5 V unbuffered non-ECC DIMMs install without voltage changes
- 240-pin 2Rx8 modules fit the two available memory slots
- Major-brand chipset and lifetime warranty ensure long-term reliability
사양
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM10246410600DIMM |
| Capacity | 16GB (2 x 8GB) |
| Type | 240-Pin DDR3 SDRAM |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL9 |
| Timing | 9-9-9 |
| Voltage | 1.5V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | HP/Compaq« Business Pro 4300 SFF DESKTOP |
| Package Content | 2 Memory RAM Sticks |
이 상품에 대한 질문
How do I install the 240-pin DDR3 DIMMs into the HP Pro 4300 SFF and which step is often missed?
Power off and unplug the PC, open the chassis, align each module's notch with the slot key, press firmly until both retention clips click shut, then verify 16GB appears in BIOS.
What maintenance or replacement will this 16GB kit need over its service life?
No scheduled maintenance is required; the modules carry a limited lifetime warranty against manufacturing defects, so replacement only occurs if a stick fails.
What limit appears first when the HP Pro 4300 SFF runs sustained workloads with this memory?
The platform caps total memory at 16GB across its two sockets, so capacity is the hard ceiling; the kit already fills both slots at that maximum.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.



