SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00502384BTC
재고 있음
Computer Memory Solutions
Computer Memory Solutions 32GB (2x16GB) DDR4 2133MHz ECC SODIMM FS1018 D42
32 GB dual-channel DDR4 ECC SODIMM kit validated for Synology FlashStation FS1018 at 2133 MHz CL15
- Capacity32GB (2 x 16GB)
- Type260-Pin DDR4 SO-DIMM
- SpeedDDR4 2133 (PC4 17000)
- CAS LatencyCL15
- Timing15-15-15
- Voltage1.2V
- ECC protection guards data integrity in the Synology FS1018
- 32 GB kit fills both slots for maximum supported capacity
- 2133 MHz DDR4 speed matches the system specification exactly
- Unbuffered 260-pin SODIMM form factor installs without adapters
- 2 V operation reduces power draw and heat output
32GB DDR4 ECC SODIMM kit for Synology FS1018
This 32GB kit contains two 16GB DDR4 2133MHz ECC unregistered SODIMM modules. It is built for the Synology FlashStation FS1018 and fills both available slots. The CL15 timing and 1.2V voltage match the system specification. Buyers who need non-ECC memory or a different form factor should look elsewhere.
Capacity reaches the FS1018 limit of 32GB
The kit delivers the maximum 32GB the FS1018 supports across its two slots. Each 16GB stick uses a 2Rx8 organisation with major-brand chips. There is no headroom for further expansion because the platform caps at this amount. Users who anticipate growth beyond 32GB cannot use this platform.
ECC unregistered DDR4 2133MHz at CL15
The modules run at DDR4 2133 (PC4 17000) with 15-15-15 timings and 1.2V operation. ECC is present and the sticks are unbuffered, non-registered 260-pin SODIMMs. This exact combination is the single specification that determines compatibility with the FS1018.
주요 특징
- ECC protection guards data integrity in the Synology FS1018
- 32 GB kit fills both slots for maximum supported capacity
- 2133 MHz DDR4 speed matches the system specification exactly
- Unbuffered 260-pin SODIMM form factor installs without adapters
- 2 V operation reduces power draw and heat output
사양
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM20487217000ECCSO |
| Capacity | 32GB (2 x 16GB) |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Timing | 15-15-15 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Unregistered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | Synology FlashStation FS1018 |
| Package Content | 2 Memory RAM Sticks |
이 상품에 대한 질문
Will this 2133 MHz DDR4 kit run correctly alongside any existing 2133 MHz DDR4 SODIMMs I keep in the FS1018?
Yes, the kit is rated at DDR4 2133 (PC4 17000) with CL15 timing and 1.2 V, matching the FS1018 specification so mixed modules of the same speed and voltage will operate together.
How can I confirm the 32 GB (2 x 16 GB) ECC modules are detected and error-correction is active after installation?
Boot the FS1018, open DSM Control Panel > Info Center, and verify total memory shows 32 GB with ECC status reported as enabled.
What ships in the box and is anything else required to complete the upgrade?
The package contains two 260-pin DDR4 ECC SODIMM sticks; the FS1018 has two slots and supports a maximum of 32 GB, so no additional parts are needed.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
