SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00502069BTC
재고 있음
Computer Memory Solutions
Computer Memory Solutions 4GB (2x2GB) DDR3 1333 for HP/Compaq 6200 Pro SFF/MT memory upgrade
A 4 GB DDR3 kit (two 2 GB modules) rated at 1333 MHz for the HP/Compaq 6200 Pro SFF/MT desktop
- Capacity4GB (2 x 2GB)
- Type240-Pin DDR3 SDRAM
- SpeedDDR3 1333 (PC3 10600)
- CAS LatencyCL9
- Timing9-9-9
- Voltage1.5V
- 2 x 2 GB kit adds 4 GB total capacity
- DDR3 1333 MHz speed matches system specification
- CL9 latency supports stable desktop operation
- 5 V unbuffered non-ECC design fits HP 6200 Pro SFF/MT
- 240-pin DIMM form factor installs directly into 4 available slots
Compatible HP 6200 Pro SFF/MT memory
This 4 GB kit contains two 2 GB DDR3 modules built for the HP/Compaq 6200 Pro small-form-factor and mini-tower desktops. Each stick runs at 1333 MHz with CL9 timings at the standard 1.5 V. The unbuffered non-ECC design matches the original specification for these business systems.
Dual-channel kit for four-slot motherboard
The two DIMMs populate a pair of the board’s four 240-pin slots to enable dual-channel bandwidth. The platform supports up to 16 GB total, leaving two sockets free for future expansion. No heat spreaders are fitted so the modules clear tight SFF chassis interiors without interference.
CMS lifetime warranty on genuine modules
Computer Memory Solutions backs the kit with a limited lifetime warranty when purchased directly from them. The package includes only the two memory sticks — no additional software, cables or brackets are supplied. Product appearance may vary from the reference photograph.
주요 특징
- 2 x 2 GB kit adds 4 GB total capacity
- DDR3 1333 MHz speed matches system specification
- CL9 latency supports stable desktop operation
- 5 V unbuffered non-ECC design fits HP 6200 Pro SFF/MT
- 240-pin DIMM form factor installs directly into 4 available slots
사양
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM2566410600DIMM1R8 |
| Capacity | 4GB (2 x 2GB) |
| Type | 240-Pin DDR3 SDRAM |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL9 |
| Timing | 9-9-9 |
| Voltage | 1.5V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | Hp/Compaq Business Desktop 6200 Pro (Sff/Mt) |
| Package Content | 2 Memory RAM Sticks |
이 상품에 대한 질문
Does the 1.5 V DDR3 1333 kit hit a thermal limit during sustained workloads?
The modules run at standard 1.5 V with no heat spreader, so sustained use relies on case airflow rather than active cooling.
How much noise or extra heat do the unbuffered DIMMs add when the system runs all day?
They are passive components with no fans, so they add no audible noise and only minimal heat at 1.5 V.
What must the HP 6200 Pro SFF or MT already have for this 240-pin kit to work?
The desktop needs four DDR3 DIMM slots supporting up to 16 GB total and a BIOS that recognises 2 GB unbuffered modules.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
