SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00502107BTC
재고 있음
Computer Memory Solutions
Computer Memory Solutions 512MB DDR1 266MHz SODIMM memory upgrade B106
Adds 512 MB of DDR1 266 MHz SODIMM memory to compatible HP Color LaserJet 3800 printers
- Capacity512MB
- SpeedDDR 266 (PC 2100)
- CAS LatencyCL2.5
- Timing3-3-3
- Voltage2.5V
- ECCNo
- 512 MB capacity expands printer memory for larger print jobs
- DDR1 266 MHz speed matches PC2100 specification for compatible HP printers
- 100-pin SODIMM form factor fits the single memory slot in Color LaserJet 3800 series
- Non-ECC unbuffered design meets the exact memory type required by these models
- 5 V operating voltage aligns with printer motherboard requirements for stable operation
Designed for HP Color LaserJet 3800 printers
This 512MB DDR1 SODIMM module operates at 266MHz with CL2.5 timing and runs on 2.5V. It is an unbuffered, non-ECC stick built to the PC2100 standard using major-brand chips. The 100-pin form factor fits the single memory socket in the specified HP Color LaserJet 3800, 3800Dn, 3800Dtn and 3800N printers.
Suits owners upgrading those LaserJet models
It adds the maximum supported memory for faster rasterising of complex print jobs and smoother handling of multiple queued documents. Buyers who need ECC error correction, registered modules or a different pin count should look at something else, as this stick provides neither. It is also not intended for laptop or desktop system memory slots.
Steady throughput during long print runs
The unbuffered DDR1 design delivers consistent bandwidth while the printer processes page after page without the latency spikes that can stall a busy queue. With no heat spreader, the module relies on the printer's internal airflow, which is sufficient for its low-power 2.5V operation during sustained workloads.
주요 특징
- 512 MB capacity expands printer memory for larger print jobs
- DDR1 266 MHz speed matches PC2100 specification for compatible HP printers
- 100-pin SODIMM form factor fits the single memory slot in Color LaserJet 3800 series
- Non-ECC unbuffered design meets the exact memory type required by these models
- 5 V operating voltage aligns with printer motherboard requirements for stable operation
사양
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM512MBPC2100100PIN |
| Capacity | 512MB |
| Speed | DDR 266 (PC 2100) |
| CAS Latency | CL2.5 |
| Timing | 3-3-3 |
| Voltage | 2.5V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | Hp Color Laserjet 3800, 3800Dn, 3800Dtn, 3800N |
| Package Content | 1 Memory RAM Stick |
이 상품에 대한 질문
Will the 100-pin SODIMM fit my HP Color LaserJet 3800 printer?
Yes, this module is built to the 100-pin SODIMM form factor specified for the HP Color LaserJet 3800, 3800Dn, 3800Dtn and 3800N models.
Can I run this DDR1 266MHz stick alongside any existing memory in the printer?
The printer has a single memory socket, so this 512MB module will be the only stick installed and will replace any existing memory.
How can I confirm the 512MB upgrade is active after installation?
Print a configuration page from the printer menu; the reported memory total should show 512MB.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
