SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00501067BTC
재고 있음
Computer Memory Solutions
Computer Memory Solutions CM2048722400ECCNR 64GB (4x16GB) DDR4 2400 ECC Unregistered DIMM memory upgrade
64GB kit of four 16GB DDR4 2400 ECC unregistered DIMMs validated for Dell PowerEdge T30, T330 and Storage NX430
- Capacity64GB (4 x 16GB)
- Type288-Pin DDR4 SDRAM
- SpeedDDR4 2400 (PC4 19200)
- CAS LatencyCL17
- Timing17-17-17
- Voltage1.2V
- 64 GB total capacity with four 16 GB modules
- DDR4 2400 speed rated at PC4 19200
- ECC unregistered design for data integrity
- CL17 17-17-17 timings at 1.2 V
- Validated for Dell PowerEdge T30, T330, NX430
64GB ECC DDR4 Kit for Dell PowerEdge Servers
This 64GB kit contains four 16GB DDR4 2400 unregistered ECC DIMMs built for Dell PowerEdge T30, T330 and Storage NX430 systems. It targets administrators who need the full 64GB maximum capacity these platforms support. Buyers who require registered or load-reduced modules cannot use this kit.
288-Pin Unbuffered DIMMs with Major Brand Chips
Each module is a 288-pin 2Rx8 DIMM running at 1.2V with CL17 17-17-17 timings and no heat spreader. The unregistered design fits the four native memory slots in the compatible Dell servers without requiring registered memory support. Systems that only accept registered DIMMs will not post with these modules.
Verify Slot Count and Maximum Capacity Before
The supported platforms provide exactly four DIMM slots and a 64GB memory ceiling, so this kit fills every slot to the limit. Confirm that your motherboard revision accepts unregistered ECC DDR4 and that no BIOS restriction lowers the usable capacity. Machines needing more than 64GB or a different module rank configuration are not served by this product.
주요 특징
- 64 GB total capacity with four 16 GB modules
- DDR4 2400 speed rated at PC4 19200
- ECC unregistered design for data integrity
- CL17 17-17-17 timings at 1.2 V
- Validated for Dell PowerEdge T30, T330, NX430
사양
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM2048722400ECCNR |
| Capacity | 64GB (4 x 16GB) |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Timing | 17-17-17 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Unregistered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | Dell Poweredge T30, Poweredge T330, Storage NX430 |
| Package Content | 4 Memory RAM Sticks |
이 상품에 대한 질문
What DDR4 speed does the CM2048722400ECCNR kit run at and what bandwidth does that provide?
The kit operates at 2400 MHz, delivering PC4-19200 bandwidth across all four modules.
What physical slot type and form factor must the server provide for these modules?
Each 16 GB stick is a 288-pin DDR4 DIMM; the system needs four such slots.
How should the four sticks be installed in a PowerEdge T30 or T330 and what common mistake should be avoided?
Populate all four DIMM slots with the matched 16 GB modules; do not mix them with other capacities or speeds.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
