Corn Electronics
Corn Electronics 4-Port USB 3.0 PCIe x1 Expansion Card Low Profile 5Gbps
Adds four USB 3.0 ports at 5 Gbps via a PCIe x1 slot, includes low-profile and standard brackets, requires SATA or IDE power
- Add four USB 3.0 ports via a single PCIe x1 slot
- 5 Gbps maximum transfer speed for fast data movement
- Low-profile and standard brackets included for flexible fit
- Each port supplies up to 900 mA at 5 V for powered devices
- Backward compatible with USB 1.1, 2.0 and 3.0 devices
Four-Port USB 3.0 Expansion Card for PCIe x1 Slots
This PCIe x1 add-in card adds four external USB 3.0 ports to a desktop system. It fits both low-profile and standard brackets for flexible installation. The card targets users who need more SuperSpeed connections for peripherals or external drives. A NEC USB 3.0 driver must be installed before use.
Low-Profile Bracket and Dual Power Options
The 9.5 mm low-profile bracket is included alongside a standard bracket for different chassis types. Power is drawn from either a SATA or IDE power connector inside the case. Each port delivers up to 900 mA at 5 V for connected devices. Backward compatibility covers USB 1.1, 2.0 and 3.0 equipment.
5 Gbps Throughput on a Single Gen2 Lane
The card operates over a single-lane PCI Express Gen2 link to provide a 5 Gbps maximum data rate per port. Actual transfer speeds also include 1.5 Mbps, 12 Mbps and 480 Mbps modes for legacy devices. Supported operating systems are Windows 7, 8 and 10 in both 32-bit and 64-bit versions. Bandwidth is shared across all four ports.
주요 특징
- Add four USB 3.0 ports via a single PCIe x1 slot
- 5 Gbps maximum transfer speed for fast data movement
- Low-profile and standard brackets included for flexible fit
- Each port supplies up to 900 mA at 5 V for powered devices
- Backward compatible with USB 1.1, 2.0 and 3.0 devices
사양
이 상품에 대해 아직 공개된 사양이 없습니다.
이 상품에 대한 질문
What practical speed does the PCIe x1 Gen2 interface cap the four USB 3.0 ports at?
The x1 Gen2 link limits total bandwidth to 5 Gbps, so all four ports share that 5000 Mbps ceiling rather than each reaching it independently.
Which brackets and power connectors must the case and PSU provide for this card?
A 9.5 mm low-profile bracket and a full-height bracket are included; the card draws auxiliary power from either a SATA or an IDE power connector.
What driver step is required before the card works in Windows 7, 8 or 10?
Install the NEC USB 3.0 driver supplied by the manufacturer before inserting the card; without it the ports will not enumerate at SuperSpeed.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)



