EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
Corn Electronics
Yellow aluminium micro-ATX and mini-ITX case with a bottom RGB strip, room for a 330 mm graphics card, 158 mm CPU cooler and up to four 2.5-inch SSDs
The Corn Electronics Lucky Koala is a small-form-factor case finished in yellow aluminium. It accepts Micro-ATX and Mini-ITX motherboards and includes a bottom-mounted RGB strip for accent lighting. Builders who want a tidy, space-saving system with room for a 240 mm liquid cooler will find the layout practical. Buyers needing E-ATX support or a tempered-glass side panel should look elsewhere.
The case ships without a side window, so internal access is open once the panel is removed. Drive bays support four 2.5-inch SSDs or two 3.5-inch HDDs plus two 2.5-inch SSDs, giving flexible storage options. All fan locations — top, rear, front and middle — are optional 120 mm mounts, so cooling must be planned and sourced separately. Cable routing space behind the motherboard tray is limited by the 165 mm case height, so builders with bulky power cables may need patience.
Maximum graphics-card length is 330 mm, CPU cooler height stops at 158 mm and the power supply must not exceed 160 mm in length. The front panel provides one USB 3.0 port, one USB 2.0 port and separate audio and microphone jacks. Four expansion slots accommodate dual-slot cards, but the compact 368 mm depth leaves no room for oversized coolers or extra-long power supplies. Liquid-cooler support is limited to 120 mm or 240 mm radiators in the available fan positions.
| Brand | CORN |
|---|---|
| Model | Lucky Koala |
| Type | Micro ATX / Mini-ITX |
| Color | Yellow |
| Case Material | Aluminum |
| With Power Supply | No |
| Power Supply Mounted | Bottom |
| Motherboard Compatibility | Micro ATX / ITX |
| Side Panel | without Side Window |
| Dust Filters | Yes |
| Internal 2.5" Drive Bays | 2.5 SSD × 4 or 3.5 HDD x 2 + 2.5 SSD × 2 |
| Expansion Slots | 4 |
| Front Ports | USB3.0 × 1, USB2.0 × 1, Audio × 1, MIC × 1 |
| Fan Options | Top: 1×120mm (optional); Rear: 1×120mm(optional); Front: 2 ×120mm(optional); Middle: 2 x 120mm(optional) |
| Max GPU Length | 330mm |
| Max CPU Cooler Height | 158mm |
| Max PSU Length | 160mm |
| Dimensions | 368mm(L)×185mm(W)×165mm(H) |
| Package Content | Buttom LED Strip |
Power on the system and check that the bottom LED strip illuminates; the strip is included in the package and connects to a standard motherboard RGB header for control.
The package includes the yellow aluminium chassis and the bottom LED strip; you must buy a Micro-ATX or Mini-ITX motherboard, CPU, cooler no taller than 158mm, GPU up to 330mm, ATX PS2 power supply no longer than 160mm, storage drives, and any 120mm fans you wish to install.
Pick the four 2.5″ SSD layout for an all-solid-state build; choose the mixed layout if you need high-capacity 3.5″ hard drives alongside a couple of SSDs.
이 진열대의 다른 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
결제할 코인과 가격을 확인할 통화입니다.
체크아웃 시 지갑에서 전송됩니다.
표시 전용 — 카탈로그 가격은 달러 기준입니다.
일치하는 통화가 없습니다.
사이트에서 사용할 언어를 선택하십시오.
처음 방문하셨나요?
이미 계정이 있으신가요?
자동 재설정 기능은 없습니다. 이 쇼핑몰은 어떠한 메일도 보내지 않으므로 요청할 일회용 링크 자체가 없습니다. 계정에 등록된 이메일 주소를 그대로 두시면 담당자가 직접 확인해 처리합니다.
요청 접수
받은편지함으로 오는 것은 아무것도 없습니다 — 이 쇼핑몰은 메일을 전혀 보내지 않습니다. 담당자가 직접 확인해 처리합니다.
기억나셨나요?