Corsair Frame 4000D CC-9011290-WW ATX Mid Tower PC Case Black
- ATX Mid Tower
- Black
Corsair
ATX mid-tower with steel and tempered glass panels, three included RS120 ARGB fans, InfiniRail mounting, dual 360 mm radiator support and a GPU anti-sag arm
Options 2025 FRAME 4000D RS ARGB- Black
취소선으로 표시된 버전은 존재하지만, 이곳에서는 취급하지 않습니다.
The Corsair FRAME 4000D RS ARGB is a steel and tempered glass ATX mid-tower built for high-airflow custom builds. It supports Mini-ITX through E-ATX motherboards up to 305 by 277 millimetres. Three RS120 ARGB fans are included and the InfiniRail mounting system lets you reposition fans without tools. Dust filters on the bottom, front and side keep internals clean.
The fully modular interior replaces fixed drive cages and rigid fan brackets with sliding rails and removable panels. This layout makes it worth switching when you need to fit multiple 360 millimetre radiators or long graphics cards up to 430 millimetres. Two 3.5 inch and four 2.5 inch drive bays remain accessible after the change. Compatibility with reverse-connector motherboards such as ASUS BTF and MSI Project Zero removes cable routing compromises.
Under continuous load the case can run front and top 360 millimetre radiators simultaneously while the side panel accepts another 360 millimetre unit. The included 120 millimetre fans feed cool air through unrestricted mesh, and the GPU anti-sag arm prevents PCB flex during long sessions. CPU cooler clearance of 170 millimetres and PSU length up to 220 millimetres ensure high-wattage components stay within limits without throttling.
| Brand | Corsair |
|---|---|
| Series | FRAME 4000D RS ARGB |
| Part Number | CC-9011296-WW |
| Type | ATX Mid Tower |
| Color | Black |
| Case Material | Steel / Tempered Glass |
| With Power Supply | No |
| Motherboard Compatibility | Mini-ITX/Micro-ATX/ATX/E-ATX(305mm x 277mm) |
| Dust Filters | Bottom / Front / Side |
| Internal 3.5" Drive Bays | 2 |
| Internal 2.5" Drive Bays | 4 |
| Fan Options | Front: 3x 120mm, 2x 140mm, 2x 200mm (3x RS120 ARGB Fans Included)/Top: 3x 120mm, 2x 140mm/Side: 3x 120mm, 2x 140mm/PSU Shroud: 2x 120mm |
| Radiator Options | Front: 360mm, 280mm, 240mm/Top: 360mm, 280mm, 240mm/Side: 360mm, 280mm, 240mm/Rear: 120mm, 140mm |
| Max GPU Length | 430 mm |
| Max CPU Cooler Height | 170 mm |
| Max PSU Length | 220 mm |
| 배송 무게 | 10.30 kg |
| 포장 크기 | 572 × 540 × 318 mm |
이 모델의 다른 버전
같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.
The case accepts graphics cards up to 430 mm long and CPU coolers up to 170 mm tall.
The InfiniRail fan mounting system lets you slide fans into rails instead of using screws, but you must lock each rail latch or the fan can shift.
Replace the RS120 ARGB fans if bearing noise appears or RGB LEDs fail; the case also holds additional 120 mm, 140 mm or 200 mm fans for future upgrades.
이 진열대의 다른 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
결제할 코인과 가격을 확인할 통화입니다.
체크아웃 시 지갑에서 전송됩니다.
표시 전용 — 카탈로그 가격은 달러 기준입니다.
일치하는 통화가 없습니다.
사이트에서 사용할 언어를 선택하십시오.
No language matches that.
처음 방문하셨나요?
이미 계정이 있으신가요?
자동 재설정 기능은 없습니다. 이 쇼핑몰은 어떠한 메일도 보내지 않으므로 요청할 일회용 링크 자체가 없습니다. 계정에 등록된 이메일 주소를 그대로 두시면 담당자가 직접 확인해 처리합니다.
요청 접수
받은편지함으로 오는 것은 아무것도 없습니다 — 이 쇼핑몰은 메일을 전혀 보내지 않습니다. 담당자가 직접 확인해 처리합니다.
기억나셨나요?