Crucial CT1000T705SSD3 1TB internal SSD
- Internal Solid Stat…
- Consumer
Crucial
A 1 TB PCIe 5.0 x4 NVMe M.2 2280 internal SSD with an aluminium and copper heatsink, delivering up to 13,600 MB/s read and 10,200 MB/s write
Options 1TB w/ Heatsink
The Crucial T705 1TB internal SSD uses a PCIe 5.0 x4 interface and NVMe protocol to deliver sequential reads up to 13,600 MBps and writes up to 10,200 MBps. It targets gamers and creators who need high throughput for large assets and reduced load times.
Moving from a PCIe 4.0 NVMe drive to this Gen5 model can cut game load times by up to 15 percent with Microsoft DirectStorage support. The jump is worth it when workflows involve UHD or 8K video rendering, heavy texture streaming, or sustained high-queue-depth workloads that saturate older buses.
The drive follows the standard M.2 2280 form factor and ships with an aluminum and copper heatsink pre-attached. Installation requires a compatible motherboard slot and adequate case airflow; the heatsink must not be removed unless replaced by an equivalent cooling solution, otherwise thermal throttling will reduce sustained performance.
| Brand | Crucial |
|---|---|
| Series | T705 |
| Model | CT1000T705SSD5 |
| Part Number | CT1000T705SSD5 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 1TB |
| Memory Components | TLC NAND² |
| Interface | PCI-Express 5.0 x4 |
| Protocol | NVMe |
| Max Sequential Read | Up to 13,600 MBps |
| Max Sequential Write | Up to 10,200 MBps |
| 4KB Random Read | Up to 1,400,000 IOPS |
| 4KB Random Write | Up to 1,750,000 IOPS |
| HeatSink | with HeatSink |
| Features | * EXTREME GEN5 SPEEDS: Get sequential reads/writes of up to 13,600/10,200MB/s and random read/writes of up to 1,400K/1,750K IOPS for blazing performance * ULTIMATE GAMING & CREATIVITY: Load AAA game titles up to 15% faster than Gen4 SSDs with Microsoft DirectStorage. Experience the future of gaming with up to faster texture renders and reduced load times, render photos or UHD/8K+ videos, and run heavy workloads with up to less CPU utilization. * PREMIUM HEATSINK: Our aluminum and copper heatsink is engineered to maximize heat dissipation for max performance without noisy fans or liqu |
| 배송 무게 | 0.09 kg |
| 포장 크기 | 159 × 102 × 25 mm |
이 모델의 다른 버전
같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.
The drive uses the standard M.2 2280 form factor. The attached aluminum and copper heatsink adds height, so verify your motherboard has enough clearance above the slot and that any motherboard shield can accommodate the thicker profile.
Install the drive into a PCIe 5.0 x4 M.2 slot wired for NVMe. The step people miss is confirming the slot shares bandwidth with other devices; check the manual to ensure the slot runs at full x4 speed and does not drop to x2 when a second drive or GPU is populated.
The 232-layer TLC NAND is rated for the drive's 1 TB capacity with standard endurance. Monitor health via SMART attributes; replacement is typically needed only after the rated terabytes written are exceeded, which varies by workload intensity.
이 진열대의 다른 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
결제할 코인과 가격을 확인할 통화입니다.
체크아웃 시 지갑에서 전송됩니다.
표시 전용 — 카탈로그 가격은 달러 기준입니다.
일치하는 통화가 없습니다.
사이트에서 사용할 언어를 선택하십시오.
일치하는 언어가 없습니다.
처음 방문하셨나요?
이미 계정이 있으신가요?
자동 재설정 기능은 없습니다. 이 쇼핑몰은 어떠한 메일도 보내지 않으므로 요청할 일회용 링크 자체가 없습니다. 계정에 등록된 이메일 주소를 그대로 두시면 담당자가 직접 확인해 처리합니다.
요청 접수
받은편지함으로 오는 것은 아무것도 없습니다 — 이 쇼핑몰은 메일을 전혀 보내지 않습니다. 담당자가 직접 확인해 처리합니다.
기억나셨나요?