SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00494419BTC
재고 있음
Crucial
Crucial FF4D516G6000HC38ADC01 16GB DDR5 6000MT/s desktop RAM
A 16 GB DDR5 desktop module running at 6000 MT/s with CL38 timing and 1.1 V operation
- Ready for 13th Gen Intel Core and Ryzen 7000 Series processors
- Intel XMP 3.0 and AMD EXPO supported on the same module
- 5600 MT/s speed downclocks to 5200 MT/s or 4800 MT/s when required
- 16 GB DDR5 capacity at 1.1 V for efficient multitasking
- 288-pin UDIMM form factor with PC5-44800 bandwidth
16GB DDR5 6000MT/s Desktop Module
This 16GB DDR5 UDIMM runs at 6000MT/s with a CAS latency of 38 and 1.1V voltage. It targets builders using 13th Gen Intel Core or AMD Ryzen 7000 Series processors who want a single 288-pin stick for productivity, gaming and multitasking. The module supports both Intel XMP 3.0 and AMD EXPO profiles on the same hardware. Non-ECC unbuffered design suits standard consumer desktop platforms.
UDIMM Build and Dual Profile Support
The stick uses a 288-pin UDIMM form factor with a 1Rx8 rank configuration and PC5-44800 rating. Gold edge contacts meet the DDR5 UDIMM layout standard for reliable seating in compatible motherboard slots. Onboard SPD hub stores both XMP 3.0 and EXPO data so the firmware can apply the correct timings automatically at boot. No extra cables or power connectors are required beyond the DIMM slot itself.
Compatibility Checks Before Ordering
Verify that your motherboard and CPU officially support DDR5 memory and the 6000MT/s data rate with XMP 3.0 or EXPO. Confirm the board has a free 288-pin DDR5 UDIMM slot and that the BIOS is updated to the version that enables the chosen profile. The module can downclock to 5600MT/s, 5200MT/s or 4800MT/s if the platform cannot run the rated speed. Buyers who need ECC error correction or registered DIMMs cannot use this kit.
주요 특징
- Ready for 13th Gen Intel Core and Ryzen 7000 Series processors
- Intel XMP 3.0 and AMD EXPO supported on the same module
- 5600 MT/s speed downclocks to 5200 MT/s or 4800 MT/s when required
- 16 GB DDR5 capacity at 1.1 V for efficient multitasking
- 288-pin UDIMM form factor with PC5-44800 bandwidth
사양
이 상품에 대해 아직 공개된 사양이 없습니다.
이 상품에 대한 질문
Does the DDR5 6000MT/s module run at 5600MT/s on systems that only support 5600MT/s?
Yes, the 5600MT/s speed can downclock if the system specification only supports 5600MT/s, 5200MT/s or 4800MT/s.
Will the 288-pin UDIMM fit a standard desktop DDR5 slot?
The module uses the industry-standard DDR5 UDIMM layout with 288 pins, matching regular desktop DDR5 sockets.
How do I enable the rated 6000MT/s speed, and what step is often missed?
Enable Intel XMP 3.0 or AMD EXPO in the BIOS after installing the module; forgetting to activate the profile leaves the memory at the default JEDEC speed.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
