darkFlash DF-DB330M-WH-DRG Cinnamoroll PC Case
- White
- Tempered glass
darkFlash
A white Micro-ATX case with 270° frameless glass, five pre-installed ARGB fans, and official Sanrio Pompompurin graphics
Option Pom Pom Purin
The darkFlash DF-DB330M-WH-BDG is a white Micro-ATX and Mini-ITX case featuring official Sanrio Pompompurin artwork across its tempered glass panels. Licensed character graphics and warm yellow accents turn the compact enclosure into a themed collectible centrepiece. Builders who want a character-driven aesthetic without sacrificing standard component support will find the design integrates the theme structurally rather than as a simple decal.
Dual frameless tempered glass panels remove the front corner post to deliver a 270° panoramic view of the interior hardware and ARGB lighting. This replaces traditional framed or single-panel designs that obstruct side angles and limit component visibility. The jump is worthwhile when the build is meant to be displayed prominently and the unobstructed sightline from front to side is a priority over maximum dust filtration at the front face.
The 333 x 218 x 400 mm chassis fits Micro-ATX and Mini-ITX boards, graphics cards up to 322 mm, and CPU coolers up to 180 mm while supporting a top-mounted 240 mm radiator and a rear 120 mm radiator. Five pre-installed ARGB fans — two top, two reverse-blade bottom, and one rear — establish a bottom-to-top airflow path so no separate fan kit is required. One 3.5" bay and two 2.5" bays handle storage, while a deep rear cable channel and top I/O with USB 3.0, USB 2.0, HD audio, power and reset keep the build clean and accessible.
| Brand | darkFlash |
|---|---|
| Model | DF-DB330M-WH-BDG |
| Color | White |
| Case Material | Tempered glass |
| Motherboard Compatibility | Micro ATX / Mini ITX |
| Internal 3.5" Drive Bays | 1 |
| Internal 2.5" Drive Bays | 2 |
| Expansion Slots | 4 |
| Fan Options | Bottom - 2 x 120mm / Rear - 1 x 120mm |
| Pre-installed Fans | Five Pre-Installed ARGB Fans: Two top fans, two reverse-blade bottom fans, and one rear fan |
| Radiator Options | Rear - Up to 120mm / Top - Up to 240mm |
| Max GPU Length | 322 mm |
| Max CPU Cooler Height | 180 mm |
| Dimensions | 333 x 218 x 400 mm |
| 배송 무게 | 5.35 kg |
| 포장 크기 | 447 × 406 × 295 mm |
이 모델의 다른 버전
같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.
The case fits graphics cards up to 322 mm long and CPU air coolers up to 180 mm tall, with room for a 240 mm top radiator or 120 mm rear radiator.
The reverse-blade bottom fans are factory-oriented as intake; keep them blowing upward so the bottom-to-top airflow path stays consistent with the top exhaust fans.
Drive brackets use screws; secure each 3.5" or 2.5" drive with the included fasteners before sliding the tray into the chassis.
이 진열대의 다른 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
결제할 코인과 가격을 확인할 통화입니다.
체크아웃 시 지갑에서 전송됩니다.
표시 전용 — 카탈로그 가격은 달러 기준입니다.
일치하는 통화가 없습니다.
사이트에서 사용할 언어를 선택하십시오.
일치하는 언어가 없습니다.
처음 방문하셨나요?
이미 계정이 있으신가요?
자동 재설정 기능은 없습니다. 이 쇼핑몰은 어떠한 메일도 보내지 않으므로 요청할 일회용 링크 자체가 없습니다. 계정에 등록된 이메일 주소를 그대로 두시면 담당자가 직접 확인해 처리합니다.
요청 접수
받은편지함으로 오는 것은 아무것도 없습니다 — 이 쇼핑몰은 메일을 전혀 보내지 않습니다. 담당자가 직접 확인해 처리합니다.
기억나셨나요?