저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
A silver 2.5 inch SAS hard drive with a label showing 300GB 10K RPM

DELL

DELL WD3001BKHG 300GB 10K 2.5" SAS internal hard drive

SKU CH-MPA9-PTZ2D MPN WD3001BKHG

300 GB 10 000 RPM 2.5" SAS internal hard drive with hot-swap capability

  • 10 000 RPM for rapid data access
  • 300 GB capacity stores critical workloads
  • SAS 6 Gb/s interface enables fast throughput
  • 5 inch form factor fits dense bays
  • Hot-swap support allows drive changes without downtime

300 GB 10K SAS drive

The Dell WD3001BKHG is a 300 GB 2.5" internal hard drive spinning at 10000 RPM with a SAS 6Gb/s interface. It is built for servers and storage arrays that need fast sequential access and hot-swap capability. The 3001 model delivers enterprise-grade reliability in a compact form factor. Condition is new.

Suits high-IOPS server workloads

This drive suits administrators who need 10K rotational speed for transactional databases or virtualization hosts. Buyers who want more storage capacity per bay should look at larger drives. Systems without a SAS backplane or controller cannot use this drive. Laptops and consumer desktops lack the required 2.5" SAS hot-swap bays.

SAS 6Gb/s interface decides fit

The single specification that determines compatibility is the SAS 6Gb/s interface. Your server or enclosure must provide a SAS port and hot-swap cage that accept 2.5" drives. Without a SAS controller this drive will not function. Verify the backplane supports 6 Gb/s signalling before purchase.

주요 특징

  • 10 000 RPM for rapid data access
  • 300 GB capacity stores critical workloads
  • SAS 6 Gb/s interface enables fast throughput
  • 5 inch form factor fits dense bays
  • Hot-swap support allows drive changes without downtime

사양

이 상품에 대해 아직 공개된 사양이 없습니다.

이 상품에 대한 질문

How do I install the 2.5" SAS drive into a hot-swap bay and what step is often missed?

Slide the drive into the bay until the SAS connector seats firmly, then lock the carrier latch; the step often missed is fully engaging the latch so the drive registers on the SAS 6Gb/s bus.

What maintenance or replacement will the 10000RPM 300GB drive need later?

Mechanical wear on the spindle and actuator means the drive itself will eventually need replacement; no user-serviceable parts exist inside the sealed enclosure.

What limit appears first during sustained writes on the SAS 6Gb/s interface?

The 10000RPM mechanical throughput ceiling is reached before the 6Gb/s SAS link saturates, so sustained transfer rates level off at the drive's physical maximum.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.