EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
DIYPC
ATX mid-tower steel case holds ATX, Micro-ATX and Mini-ITX boards, fits GPUs to 370 mm and CPU coolers to 166 mm, includes three 120 mm fans and offers front USB 3.0 plus two USB 2.0 ports
The DIYPC DIY-S05-BK is a steel chassis that accepts ATX, Micro-ATX and Mini-ITX motherboards. It ships without a power supply and uses a top-mounted PSU layout. Seven expansion slots give room for full-length add-in cards, while two 3.5-inch and two 2.5-inch internal bays handle storage drives.
Three black 120 mm fans come pre-installed, two at the front and one at the rear, creating a front-to-back airflow path. Two additional 120 mm fan positions on the side panel are available if extra intake is desired. A removable dust filter on the top panel simplifies cleaning without tools.
The interior offers 370 mm of graphics card clearance and 166 mm for a CPU cooler, allowing large components to fit without obstruction. An advanced cable management design provides 26 mm of routing space behind the motherboard tray, keeping cables tidy and airflow unimpeded during long sessions. The power supply length limit is 180 mm.
| Brand | DIYPC |
|---|---|
| Model | DIY-S05-BK |
| Type | ATX Mid Tower |
| Color | Black |
| Case Material | Steel |
| With Power Supply | No |
| Power Supply Mounted | Top |
| Motherboard Compatibility | ATX / Micro ATX / Mini ITX |
| Side Panel | without Side Window |
| LED | No |
| Internal 3.5" Drive Bays | 2 |
| Internal 2.5" Drive Bays | 2 |
| Expansion Slots | 7 |
| Front Ports | 1 x USB3.0, 2 x USB2.0. HD Audio |
| Fan Options | Front: 2 x 120mm Black Fan (Pre-installed) Side: 2 x 120mm Fan (Optional) Rear: 1 x 120mm Black Fan (Pre-Installed) |
| Pre-installed Fans | Front - 2 x 120mm / Rear - 1 x 120mm |
| Max GPU Length | 370 mm |
| Max CPU Cooler Height | 166 mm |
| Max PSU Length | 180 mm |
| Features | Advanced cable management design -26mm Support up to 370mm GPU, 166mm CPU Top mounted IO ports - 1 x USB 3.0 and 2 x USB2.0 for up-to-date high speed data transfer 5 fans capability (2 x 120mm fan x front, 1 x 120mm fan x rear pre-installed) provide good cooling performance Dust filter at top - easy clean |
| 배송 무게 | 3.81 kg |
| 포장 크기 | 475 × 465 × 224 mm |
Mount the ATX, Micro-ATX or Mini-ITX board on the included standoffs, then route the 24-pin, CPU and front-panel cables through the 26 mm cable-management cut-outs before securing the side panel; the step most often missed is connecting the top-mounted USB 3.0, dual USB 2.0 and HD audio headers before the board is fully seated.
Slide out the top magnetic dust filter and rinse or vacuum it; the three pre-installed 120 mm fans (two front, one rear) can be wiped down at the same time, and the two optional side 120 mm mounts stay empty unless you add fans later.
The 370 mm maximum GPU length is the first hard stop; cards longer than that will not fit, while the 166 mm CPU cooler ceiling and 180 mm PSU depth remain within typical enthusiast ranges.
이 진열대의 다른 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
결제할 코인과 가격을 확인할 통화입니다.
체크아웃 시 지갑에서 전송됩니다.
표시 전용 — 카탈로그 가격은 달러 기준입니다.
일치하는 통화가 없습니다.
사이트에서 사용할 언어를 선택하십시오.
처음 방문하셨나요?
이미 계정이 있으신가요?
자동 재설정 기능은 없습니다. 이 쇼핑몰은 어떠한 메일도 보내지 않으므로 요청할 일회용 링크 자체가 없습니다. 계정에 등록된 이메일 주소를 그대로 두시면 담당자가 직접 확인해 처리합니다.
요청 접수
받은편지함으로 오는 것은 아무것도 없습니다 — 이 쇼핑몰은 메일을 전혀 보내지 않습니다. 담당자가 직접 확인해 처리합니다.
기억나셨나요?