Zyvpee DBTB0838B2S 80mm case fan 12V 2.1A 4-wire 7000 RPM 80 CFM 50 dBA 80x76mm
- Case Fan
- Case
Dynatron
Compact copper heatsink with an 80 mm dual-ball-bearing PWM fan fits low-profile LGA 1156 builds
The Dynatron K199 is an 80 mm air cooler built around a solid copper heatsink and a dual-ball-bearing fan. It mounts horizontally on Intel LGA 1156 sockets and supports Core i5-750, Core i7-860, Core i7-870 and Xeon 3400 series processors. The 4-pin PWM connector allows automatic speed control.
This unit upgrades the thin aluminium coolers bundled with boxed processors, adding copper conductivity and a wider RPM range. The jump is worthwhile when the original cooler runs at high duty cycles or when a lower-profile 29 mm height is required for tight chassis. It does not suit builders needing higher thermal capacity for overclocked CPUs.
The 80 x 80 x 15 mm fan delivers 5.355 CFM at 1000 RPM and 14.719 CFM at 5000 RPM, with noise rising from 20.71 dBA to 51.7 dBA across the range. Airflow and static pressure are constrained by the small diameter, so sustained heavy loads may exceed its dissipation ability. Compatibility ends at LGA 1156 and the listed LGA 1155 processors.
| Brand | Dynatron |
|---|---|
| Model | K199 |
| Type | Fan & Heatsinks |
| Fan Size | 80mm |
| CPU Socket Compatibility | Intel LGA 1156 |
| Bearing Type | 2 Ball |
| RPM | At Duty Cycle 0-20%: 1000 RPM At Duty Cycle 50%: 2500 RPM At Duty Cycle 100%: 5000 RPM |
| Air Flow | At Duty Cycle 0-20%: 5.355 CFM At Duty Cycle 50%: 7.654CFM At Duty Cycle 100%: 14.719 CFM |
| Noise Level | At Duty Cycle 0-20%: 20.71 dBA At Duty Cycle 50%: 37.5 dBA At Duty Cycle 100%: 51.7 dBA |
| Power Connector | 4 Pin (PWM) |
| Heatsink Material | Copper |
| Fan Mounting Types to Heatsink | Horizontal |
| Max CPU Cooler Height | 29 mm |
| Fan Dimensions | 80 x 80 x 15 mm |
| Heatsink Dimensions | 85.0 x 81.5 x 28.5mm |
| Weight | 355g +/- 5g |
| Features | CPU Support: Intel Core i5 I5-750; Xeon Processor 3400 Series; Core i7 Processors, I7-870 & I7-860 |
| 배송 무게 | 0.57 kg |
| 포장 크기 | 203 × 152 × 102 mm |
The cooler stands 29 mm tall with a heatsink footprint of 85.0 x 81.5 mm. Measure your case CPU clearance and the area around the LGA 1156 socket to confirm fit.
Align the supplied screw brackets with the LGA 1156 mounting holes, tighten diagonally in stages, and ensure the pre-applied thermal grease contacts the CPU before powering on.
The dual ball bearing fan is rated for long life; plan to replace it if noise rises above 51.7 dBA at full speed or airflow drops below 14.719 CFM.
이 진열대의 다른 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
결제할 코인과 가격을 확인할 통화입니다.
체크아웃 시 지갑에서 전송됩니다.
표시 전용 — 카탈로그 가격은 달러 기준입니다.
일치하는 통화가 없습니다.
사이트에서 사용할 언어를 선택하십시오.
처음 방문하셨나요?
이미 계정이 있으신가요?
자동 재설정 기능은 없습니다. 이 쇼핑몰은 어떠한 메일도 보내지 않으므로 요청할 일회용 링크 자체가 없습니다. 계정에 등록된 이메일 주소를 그대로 두시면 담당자가 직접 확인해 처리합니다.
요청 접수
받은편지함으로 오는 것은 아무것도 없습니다 — 이 쇼핑몰은 메일을 전혀 보내지 않습니다. 담당자가 직접 확인해 처리합니다.
기억나셨나요?