저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인

Dynatron

Dynatron Q11 4U LGA1700 125W 21.3dB 12000RPM CPU cooler

SKU CH-0JGN-MH5EH

A 4U server air cooler with heatpipes and aluminium fin stack dissipates up to 125 W on Intel LGA1700 sockets at 21.3 dB and 12000 RPM

  • Cools CPUs up to 125 W TDP with heatpipe aluminium stack
  • Fits Intel LGA 1700 socket for direct compatibility
  • Runs at 21.3 dB for quiet server operation
  • Spins up to 12000 RPM for strong airflow
  • Dual ball-bearing fan ensures long service life

Dynatron Q11 4U LGA1700 Cooler

The Dynatron Q11 is a 4U active CPU air cooler built for Intel LGA1700 socket servers. It uses heatpipes with an aluminium base and fin stack to dissipate up to 125 watts of thermal load. The unit suits rackmount builds where a low-profile cooler is required.

Sustained Load Behaviour

Dual ball-bearing fans spin at up to 12000 RPM to maintain airflow during continuous operation. Acoustic output is rated at 21.3 dB under load. The aluminium fin stack and heatpipe assembly is designed to handle the full 125 W TDP without throttling in a properly ventilated chassis.

Pre-Installation Checks

Verify the server chassis provides a 4U or taller internal height for the cooler to fit. Confirm the motherboard uses an LGA1700 socket and that the CPU thermal design power does not exceed 125 watts. Ensure the fan header can supply the required current for the high-speed motor.

주요 특징

  • Cools CPUs up to 125 W TDP with heatpipe aluminium stack
  • Fits Intel LGA 1700 socket for direct compatibility
  • Runs at 21.3 dB for quiet server operation
  • Spins up to 12000 RPM for strong airflow
  • Dual ball-bearing fan ensures long service life

사양

이 상품에 대해 아직 공개된 사양이 없습니다.

이 상품에 대한 질문

How loud is the 12000 RPM fan when the cooler runs at its 125 W limit all day?

The cooler produces 21.3 dB at full speed, a level that remains constant during continuous 125 W operation.

What mounting hardware must already be on the motherboard for this cooler to fit?

The cooler requires an Intel LGA 1700 socket; no additional brackets or back-plates are mentioned.

Will the 4U height clear DIMM slots and PCIe cards in an older 4U chassis?

The 4U form factor is designed for 4U server cases and up, providing standard clearance for memory and expansion cards.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.