Zyvpee DBTB0838B2S 80mm case fan 12V 2.1A 4-wire 7000 RPM 80 CFM 50 dBA 80x76mm
- Case Fan
- Case
EN-Labs
Adds four USB 2.0 ports to a 3.5" front bay with a single motherboard header and Molex power, delivering up to 480 Mbps transfer speeds
This EN-Labs FP35U24M adds four USB 2.0 ports to a PC through a standard 3.5-inch drive bay. It connects to a single USB 2.0 9/10-pin motherboard header and draws supplemental power from a Molex 4-pin connector. A 2ft adapter cable is included for the internal header connection. The unit fits any available 3.5-inch front bay using the supplied screws.
It suits anyone with a free 3.5-inch bay and a spare USB 2.0 header who wants convenient front access for peripherals. The Molex power input helps support higher-draw devices on all four ports. Builders whose cases lack a 3.5-inch opening or whose motherboards have no free USB 2.0 header cannot install this hub. Users needing USB 3.0 or 3.1 speeds should look at a different interface standard.
The decisive specification is the need for one USB 2.0 9/10-pin motherboard header to run all four ports. Data throughput reaches 480 Mbps per port, shared across the hub. Each port can deliver up to 500 mA of power when the Molex connector is attached. Without a compatible header and a Molex power lead from the PSU, the device will not function.
| Brand | EN-Labs |
|---|---|
| Series | USB 2.0 Hub |
| Model | FP35U24M |
| Color | Black |
| Type | USB |
| Standards | USB 2.0 |
| Ports | 4 x USB 2.0 |
| Transfer Rate | 400/480Mbps |
| Power Input | Molex 4pin |
| Features | Ports: 4 x USB 2.0 High Speed Data Transfer Rate: Up to 480Mb/s USB 2.0 High Speed Fits: 3.5" Open Bay Space Cable Length: 50cm Compatible with Windows XP/Vista/7/8/8.1 Plug and Play Hot Swappable Molex 4-pin power connector to power USB devices from your PC power supply. Backwards compatible with USB 1.1 |
| Package Contents | 1x 4 Ports USB 2.0 Front Panel Bay, 1x Pack of Screws |
The package includes the 4-port USB 2.0 front panel bay and a pack of mounting screws. A USB 2.0 9/10-pin motherboard header and a Molex 4-pin power connector from your PSU are required but not included.
The hub is built for a 3.5-inch front bay. If your case only has a 5.25-inch bay, you will need the optional Front Bay Bracket Adapter accessory, which is sold separately.
Each of the four ports complies with the USB 2.0 standard and can deliver up to 480 Mbps of bandwidth and 500 mA of power, so high-speed peripherals such as external drives will operate at their rated USB 2.0 speeds.
이 진열대의 다른 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
결제할 코인과 가격을 확인할 통화입니다.
체크아웃 시 지갑에서 전송됩니다.
표시 전용 — 카탈로그 가격은 달러 기준입니다.
일치하는 통화가 없습니다.
사이트에서 사용할 언어를 선택하십시오.
처음 방문하셨나요?
이미 계정이 있으신가요?
자동 재설정 기능은 없습니다. 이 쇼핑몰은 어떠한 메일도 보내지 않으므로 요청할 일회용 링크 자체가 없습니다. 계정에 등록된 이메일 주소를 그대로 두시면 담당자가 직접 확인해 처리합니다.
요청 접수
받은편지함으로 오는 것은 아무것도 없습니다 — 이 쇼핑몰은 메일을 전혀 보내지 않습니다. 담당자가 직접 확인해 처리합니다.
기억나셨나요?