EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
EVGA
Factory-fitted full-cover waterblock cools the 10240 CUDA core RTX 3080 Ti with 12 GB GDDR6X on a 384-bit bus
The EVGA GeForce RTX 3080 Ti XC3 Ultra Hydro Copper is a graphics card designed for custom liquid-cooling loops. It ships with a pre-installed all-metal backplate and an integrated waterblock. The card requires a separate pump, radiator, coolant and tubing to operate. It targets enthusiasts building high-performance desktop systems.
This product fits builders who already run or plan a custom open-loop cooling setup. The Hydro Copper waterblock replaces standard air cooling entirely. Buyers without a loop infrastructure should look at air-cooled or all-in-one liquid models instead. A 750 W power supply and two 8-pin or 6+2-pin PCIe connectors are required.
The frame buffer provides 12288 MB of GDDR6X memory across a 384-bit interface. Effective clock reaches 19000 MHz for 912 GB/s bandwidth. This capacity and bandwidth combination determines 4K gaming headroom and compute throughput for the 10240 CUDA cores.
| Memory Type | GDDR6X |
|---|
The card occupies 1.2 slots and measures 262.8 mm long, so verify your case clearance and loop tubing routing before purchase.
Run two separate cables from a 750 W power supply directly to the card's power connectors; do not use a single split cable.
Follow your loop manufacturer's schedule — typically every 12 to 24 months — and inspect the block for corrosion or particulate buildup during each change.
이 진열대의 다른 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
결제할 코인과 가격을 확인할 통화입니다.
체크아웃 시 지갑에서 전송됩니다.
표시 전용 — 카탈로그 가격은 달러 기준입니다.
일치하는 통화가 없습니다.
사이트에서 사용할 언어를 선택하십시오.
처음 방문하셨나요?
이미 계정이 있으신가요?
자동 재설정 기능은 없습니다. 이 쇼핑몰은 어떠한 메일도 보내지 않으므로 요청할 일회용 링크 자체가 없습니다. 계정에 등록된 이메일 주소를 그대로 두시면 담당자가 직접 확인해 처리합니다.
요청 접수
받은편지함으로 오는 것은 아무것도 없습니다 — 이 쇼핑몰은 메일을 전혀 보내지 않습니다. 담당자가 직접 확인해 처리합니다.
기억나셨나요?