EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
Formula V Line
Micro ATX mid-tower with geometric front panel, angled bottom airflow and six pre-installed 120mm ARGB fans, supporting 415mm GPU and top 360mm radiator
The Crystal Z4M Plus is a Micro-ATX mid-tower designed for Mini-ITX and Micro-ATX motherboards. It suits builders who want a smaller footprint without sacrificing graphics-card length or liquid-cooling capacity. Six pre-installed 120 mm ARGB fans provide immediate airflow and lighting. The case ships without a power supply, so the builder chooses the unit that matches their components.
The structure combines ABS, steel and two full tempered-glass side panels for a rigid, showcase-ready enclosure. A geometric front panel adds visual depth while the angled bottom directs intake straight toward the graphics card. Front I/O supplies USB 3.0, USB Type-C and audio jacks for everyday peripherals. A bottom-mounted PSU layout keeps cables tidy and the centre of gravity low. An integrated anti-sag bracket supports heavy graphics cards over long-term use.
The top panel accepts radiators up to 360 mm, defining the maximum liquid-cooling capacity for the CPU loop. Graphics cards up to 415 mm long fit comfortably, but longer models will not install. Only two 3.5-inch and one 2.5-inch internal drive bays are available, so builders needing larger storage arrays must look elsewhere. Five expansion slots cover typical add-in cards, yet multi-GPU configurations are not practical in this form factor.
| Brand | Formula V Line |
|---|---|
| Model | Crystal Z4M Plus Black |
| Type | Micro ATX Mid Tower |
| Color | Black |
| Case Material | ABS / Steel / Tempered Glass |
| With Power Supply | No |
| Power Supply Mounted | Bottom |
| Motherboard Compatibility | Micro ATX / Mini ITX |
| Side Panel | 2 x Sides Tempered Glass Panel |
| Internal 3.5" Drive Bays | 2 |
| Internal 2.5" Drive Bays | 1 |
| Expansion Slots | 5 |
| Front Ports | USB 3.0 / USB Type-C / Audio |
| Fan Options | Bottom - 3 x 120mm / Rear - 1 x 120mm / Side - 2 x 120mm / Top - 3 x 120mm |
| Pre-installed Fans | Right Side: 2 x 120mm ARGB black fans included Rear: 1 x 120mm ARGB black fan included Bottom: 3 x 120mm ARGB black fan included |
| Radiator Options | Top - Up to 360mm |
| Max GPU Length | 415 mm |
| Dimensions | 370 x 274 x 439 mm |
| 배송 무게 | 7.44 kg |
| 포장 크기 | 508 × 457 × 356 mm |
Yes, the 415 mm maximum GPU length is measured with the three bottom 120 mm ARGB fans already installed, so no fan removal is needed.
Yes, the top supports up to a 360 mm radiator and the two tempered-glass side panels remain fully compatible with that configuration.
Micro ATX and Mini ITX boards are supported, and the chassis provides five expansion slots for add-in cards.
이 진열대의 다른 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
결제할 코인과 가격을 확인할 통화입니다.
체크아웃 시 지갑에서 전송됩니다.
표시 전용 — 카탈로그 가격은 달러 기준입니다.
일치하는 통화가 없습니다.
사이트에서 사용할 언어를 선택하십시오.
처음 방문하셨나요?
이미 계정이 있으신가요?
자동 재설정 기능은 없습니다. 이 쇼핑몰은 어떠한 메일도 보내지 않으므로 요청할 일회용 링크 자체가 없습니다. 계정에 등록된 이메일 주소를 그대로 두시면 담당자가 직접 확인해 처리합니다.
요청 접수
받은편지함으로 오는 것은 아무것도 없습니다 — 이 쇼핑몰은 메일을 전혀 보내지 않습니다. 담당자가 직접 확인해 처리합니다.
기억나셨나요?