BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
US$214.99
0.00266532BTC
재고 있음
G.SKILL
G.SKILL TridentZ F4-3200C16D-32GTZSW 32GB (2×16GB) DDR4 3200 CL16 desktop RAM
32 GB dual-channel DDR4 kit at 3200 MT/s with CL16 timings and a silver-white aluminum heat spreader
- Capacity32GB (2 x 16GB)
- Type288-Pin PC RAM
- SpeedDDR4 3200 (PC4 25600)
- CAS LatencyCL16
- Timing16-18-18-38
- Voltage1.35V
- Dual-channel kit doubles bandwidth for multitasking
- CL16 latency at 3200 MT/s sharpens responsiveness
- 35 V operation reduces heat under load
- Aluminium heat spreader keeps modules cool
- Intel XMP 2.0 enables one-click profile activation
TridentZ DDR4 32GB Kit
This G.SKILL TridentZ kit provides 32GB of DDR4 desktop memory in a matched 2×16GB configuration. It runs at 3200 MT/s with a CAS latency of CL16 and timings of 16-18-18-38. The modules operate at 1.35V and feature Intel XMP 2.0 support for simple configuration on compatible platforms.
288-Pin DDR4 3200 Interface
Each module uses the standard 288-pin DIMM form factor for desktop systems. The kit is rated for DDR4 3200 (PC4-25600) speed with the specified CL16 timing. Aluminum heat spreaders in a silver and white finish cover the modules to assist with thermal management during sustained loads.
Enthusiast Intel DDR4 Builds
The kit is validated for Intel Z790, Z690, Z590, Z490, Z390, Z370 and Z270 DDR4 platforms. It also suits AMD X570, X470 and B550 chipsets. Buyers needing ECC, registered DIMMs, different capacities, speeds or latencies should select an alternative kit.
주요 특징
- Dual-channel kit doubles bandwidth for multitasking
- CL16 latency at 3200 MT/s sharpens responsiveness
- 35 V operation reduces heat under load
- Aluminium heat spreader keeps modules cool
- Intel XMP 2.0 enables one-click profile activation
사양
| Brand | G.SKILL |
|---|---|
| Series | TridentZ Series |
| Model | F4-3200C16D-32GTZSW |
| Capacity | 32GB (2 x 16GB) |
| Type | 288-Pin PC RAM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL16 |
| Timing | 16-18-18-38 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| Color | Silver / White |
| Heat Spreader | Yes |
| Features | Overclock performance DDR4 memory designed for compatible Intel platforms. Sleek and stylish aluminum heat spreader design. Intel XMP 2.0 Support. Do not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure. Memory kits will boot at the SPD speed at default BIOS settings with compatible hardware. For memory kits with XMP, enable XMP/DOCP/A-XMP in BIOS to reach the rated potential XMP overclock speed of the memory kit, subject to the use of compatible hardware. Reaching th |
| Recommend Use | AMD X570 / X470 / B550 Intel Z790 DDR4 / Z690 DDR4 / Z590 / Z490 / Z390 / Z370 / Z270 |
| 배송 무게 | 0.19 kg |
| 포장 크기 | 160 × 135 × 13 mm |
이 상품에 대한 질문
Will this dual-channel kit fit my Intel Z690 DDR4 motherboard?
The kit is listed as compatible with Intel Z690 DDR4 platforms and uses the standard 288-pin DDR4 form factor, so it will install directly into the board's DIMM slots.
Do I need to enable XMP in the BIOS to reach the rated 3200 speed?
Yes, the modules run at JEDEC base speed until Intel XMP 2.0 is enabled; once activated, the board will set 3200 MT/s with CL16-18-18-38 timings at 1.35 V.
Can I add a second identical kit later for four populated slots?
The manufacturer advises against mixing memory kits, even identical ones, because kits are validated as matched pairs; four modules should be purchased as a single tested kit.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
