eshinreal 4 Port Mini PCIe to SATA 3 Expansion Card
- Controller Card
GIGABYTE
A refurbished RTX 3060 Ti with 8 GB GDDR6 memory, 4864 CUDA cores, a 256-bit bus and WINDFORCE 2X cooling
The GIGABYTE Eagle GeForce RTX 3060 Ti is built for gamers targeting high-refresh 1440p play. Its 4864 CUDA cores and 8GB of GDDR6 memory on a 256-bit bus deliver strong frame rates in modern titles. The WINDFORCE 2X cooler with alternate spinning fans keeps thermals in check during extended sessions. A protection back plate adds structural rigidity to the ATX form factor.
Moving up from a 6GB card or an earlier architecture brings a noticeable jump in memory headroom and compute density. The 14000 MHz effective memory clock and 1665 MHz core clock raise 1% lows in texture-heavy scenes. PCI Express 4.0 support matches current platforms without bottlenecking. The single 8-pin power connector works with a 600W PSU, simplifying the swap.
The 8GB frame buffer comfortably holds high-resolution assets at 1440p with ultra settings in most current games. At 4K the 256-bit interface and 8GB capacity become the limiting factor, requiring lowered texture quality or upscaling. Four display outputs — two HDMI 2.1 and two DisplayPort 1.4a — drive multi-monitor setups up to 7680 x 4320 resolution. The 242 mm length fits most mid-tower cases.
| Brand | GIGABYTE |
|---|---|
| Series | Eagle |
| Model | GV-N306TEAGLE-8GD (rev. 2.0) |
| Interface | PCI Express 4.0 |
| Chipset Manufacturer | NVIDIA |
| GPU Series | NVIDIA GeForce RTX 30 Series |
| GPU | GeForce RTX 3060 Ti |
| Core Clock | 1665 MHz |
| CUDA Cores | 4864 |
| Effective Memory Clock | 14000 MHz |
| Memory Size | 8GB |
| Memory Interface | 256-Bit |
| Memory Type | GDDR6 |
| DirectX | DirectX 12 Ultimate |
| OpenGL | OpenGL 4.6 |
| Multi-Monitor Support | 4 |
| HDMI | 2 x HDMI 2.1 |
| DisplayPort | 2 x DisplayPort 1.4a |
| Color | Black |
| Max Resolution | 7680 x 4320 |
| SLI Support | No |
| Cooler | WINDFORCE 2X |
| Recommended PSU Wattage | 600W |
| Power Connector | 8-Pin |
| Features | NVIDIA Ampere Streaming Multiprocessors 2nd Generation RT Cores 3rd Generation Tensor Cores Powered by GeForce RTX 3060 Ti Integrated with 8GB GDDR6 256-bit memory interface WINDFORCE 2X Cooling System with alternate spinning fans 100mm unique blade fans RGB Fusion 2.0 Protection back plate LHR (Lite Hash Rate) version |
| Form Factor | ATX |
| Max GPU Length | 242 mm |
| Card Dimensions (L x H) | 9.53" x 4.88" |
| Slot Width | 2 Slots |
| 배송 무게 | 0.96 kg |
| 포장 크기 | 330 × 235 × 57 mm |
The card measures 242 mm in length and uses a standard ATX form factor; verify your case clearance against 242 mm before purchasing.
It needs a single 8-Pin PCIe power connector; insert one cable fully until the latch clicks to avoid intermittent power delivery.
Use compressed air to blow dust from the 100mm fans and heatsink fins every few months; do not disassemble the shroud or remove the back plate.
이 진열대의 다른 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
결제할 코인과 가격을 확인할 통화입니다.
체크아웃 시 지갑에서 전송됩니다.
표시 전용 — 카탈로그 가격은 달러 기준입니다.
일치하는 통화가 없습니다.
사이트에서 사용할 언어를 선택하십시오.
일치하는 언어가 없습니다.
처음 방문하셨나요?
이미 계정이 있으신가요?
자동 재설정 기능은 없습니다. 이 쇼핑몰은 어떠한 메일도 보내지 않으므로 요청할 일회용 링크 자체가 없습니다. 계정에 등록된 이메일 주소를 그대로 두시면 담당자가 직접 확인해 처리합니다.
요청 접수
받은편지함으로 오는 것은 아무것도 없습니다 — 이 쇼핑몰은 메일을 전혀 보내지 않습니다. 담당자가 직접 확인해 처리합니다.
기억나셨나요?