EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
GIGABYTE
Refurbished GeForce RTX 3080 graphics card with 10GB GDDR6X memory, 8704 CUDA cores, 1755 MHz boost clock, WINDFORCE 3X cooling, 2 x HDMI 2.1, 3 x DisplayPort 1.4a, and PCI Express 4.0 interface
This refurbished graphics card uses the NVIDIA Ampere architecture with 8704 CUDA cores and a 1755 MHz boost clock. It provides 10GB of GDDR6X memory across a 320-bit interface running at 19000 MHz effective. The PCI Express 4.0 interface connects to a system that meets the recommended 750W PSU requirement with two 8-pin power connectors.
Moving to this card adds 2nd Generation RT Cores and 3rd Generation Tensor Cores for improved rendering and AI workloads. The jump is worth it when your current GPU cannot drive 7680 x 4320 resolution at 60 Hz or lacks HDMI 2.1 and DisplayPort 1.4a for modern high-refresh displays. The WINDFORCE 3X cooling system and metal back plate support sustained loads in a 320 mm ATX form factor.
This model suits users who need 10GB VRAM for high-resolution textures and multi-monitor setups up to four displays. The 12.60 inch length fits most mid-tower cases with adequate clearance. Buyers needing SLI support or more than 10GB memory for extreme compute tasks should look at something else.
| Brand | GIGABYTE |
|---|---|
| Series | Eagle |
| Model | GV-N3080EAGLE OC-10GD |
| Interface | PCI Express 4.0 |
| Chipset Manufacturer | NVIDIA |
| GPU Series | NVIDIA GeForce RTX 30 Series |
| GPU | GeForce RTX 3080 |
| Boost Clock | 1755 MHz |
| CUDA Cores | 8704 |
| Effective Memory Clock | 19000 MHz |
| Memory Size | 10GB |
| Memory Interface | 320-Bit |
| Memory Type | GDDR6X |
| DirectX | DirectX 12 Ultimate |
| OpenGL | OpenGL 4.6 |
| Multi-Monitor Support | 4 |
| HDMI | 2 x HDMI 2.1 |
| DisplayPort | 3 x DisplayPort 1.4a |
| Max Resolution | 7680 x 4320 @ 60 Hz |
| SLI Support | No |
| Virtual Reality Ready | Yes |
| Cooler | WINDFORCE 3X |
| System Requirements | Recommended PSU: 750W |
| Recommended PSU Wattage | 750W |
| Power Connector | 2 x 8-Pin |
| Features | NVIDIA Ampere Streaming Multiprocessors 2nd Generation RT Cores 3rd Generation Tensor Cores Powered by GeForce RTX 3080 Integrated with 10GB GDDR6X 320-bit memory interface WINDFORCE 3X Cooling System with alternate spinning fans RGB Fusion 2.0 Protection metal back plate |
| Form Factor | ATX |
| Max GPU Length | 320 mm |
| Card Dimensions (L x H) | 12.60" x 5.04" |
| 배송 무게 | 2.27 kg |
| 포장 크기 | 432 × 279 × 127 mm |
The card measures 320 mm long in an ATX form factor, so verify your case clearance and ensure the motherboard has a PCI Express 4.0 slot with enough surrounding space for the triple-fan cooler.
Insert the card into a PCI Express 4.0 slot, connect both 8-pin power connectors, and secure the metal back plate; the frequent error is leaving one power connector unattached, which stops the GPU from reaching its 1755 MHz boost clock.
Dust the three alternate-spinning fans and heatsink fins every few months with compressed air to maintain airflow, and monitor fan noise or RPM drops that signal bearing wear requiring fan replacement.
이 진열대의 다른 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
결제할 코인과 가격을 확인할 통화입니다.
체크아웃 시 지갑에서 전송됩니다.
표시 전용 — 카탈로그 가격은 달러 기준입니다.
일치하는 통화가 없습니다.
사이트에서 사용할 언어를 선택하십시오.
처음 방문하셨나요?
이미 계정이 있으신가요?
자동 재설정 기능은 없습니다. 이 쇼핑몰은 어떠한 메일도 보내지 않으므로 요청할 일회용 링크 자체가 없습니다. 계정에 등록된 이메일 주소를 그대로 두시면 담당자가 직접 확인해 처리합니다.
요청 접수
받은편지함으로 오는 것은 아무것도 없습니다 — 이 쇼핑몰은 메일을 전혀 보내지 않습니다. 담당자가 직접 확인해 처리합니다.
기억나셨나요?