Hitoor 4 × 120 mm RGB case fan 1400 RPM 38 CFM 25 dBA 4.2 W fluid bearing black 6-pin remote

Four 120 mm RGB fans with remote

This set includes four 120 mm case fans in black, each rated at 1400 RPM and 38 CFM airflow. Fluid bearings and a 25 dBA noise rating target quiet operation. A single 6-pin connector powers each fan while an included remote controls RGB colour and lighting speed. The pack suits builders adding coordinated intake or exhaust to a standard chassis.

12 V 6-pin power limits daisy-chaining

Each fan draws 4.2 W from a 12 V 6-pin header, so four units need four separate connectors or a powered hub. The 120 mm frame fits common 120 mm mounts, but 25 mm thickness may clash with slim radiators or tight side panels. Maximum speed is fixed at 1400 RPM; there is no PWM curve or motherboard sync, so airflow cannot scale with CPU temperature.

Clip-on corners simplify mounting

Four corner holes accept standard screws or the supplied clips, letting you seat each fan in seconds. The remote pairs once and then toggles modes without software, though line-of-sight is required. Cable routing is the common snag: the 6-pin leads are short, so plan a hub near the PSU or use extensions to avoid tension on the connector.