저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Green PCIe bifurcation card with four horizontal x4 slots at 20mm spacing, gold edge connector, two SATA power headers

HOOCCC

HOOCCC PCIe 3.0 x16 to 4 x4 Bifurcation Expansion Card 20mm SATA Power

SKU CH-NY0V-QT6C7

Splits one PCIe 3.0 x16 slot into four x4 channels for NVMe SSDs or add-in cards with 20 mm spacing and SATA auxiliary power

  • TypePCI Express to PCI Card
  • External USB PortsPCI Express
  • External Ports4 x Serial Ports
  • Internal PortsPCI Express
  • Splits one x16 slot into four independent x4 channels with BIOS bifurcation support
  • 20mm spacing improves airflow and prevents overheating for multiple low-profile devices
  • Two SATA 15-pin inputs share up to 75W for stable multi-device operation
  • Gold-plated x16 fingers and Foxconn connectors ensure reliable signal transmission
  • Verified PCIe 3.0 speeds reach ~3,570 MB/s read and ~2,685 MB/s write per channel

PCIe 3.0 Bifurcation Card

This add-on card splits a single PCIe 3.0 x16 slot into four independent x4 channels. It requires motherboard BIOS support for x4x4x4x4 bifurcation mode. The board uses gold-plated contacts and Foxconn connectors for signal stability. It targets workstation and AI builds needing dense PCIe device expansion.

Suits Multi-Device Builds, Not Single-Card Upgrades

Builders installing multiple NVMe SSDs, single-slot GPUs, or network cards benefit from the 20mm spacing that aids airflow. The design supports up to four low-power devices simultaneously. Buyers whose motherboards lack bifurcation support cannot use this card. Systems needing x8 or x16 electrical links per device should look elsewhere.

Four x4 Channels With 75W Shared Power Budget

Each channel delivers PCIe 3.0 x4 bandwidth, verified at roughly 3570 MB/s read and 2685 MB/s write with Samsung PM9A1 SSDs. The board draws auxiliary power through two SATA 15-pin inputs, each rated for about 36W. The four slots share a maximum of 75W total. One low-power card may run on bus power alone, but 12 SATA connections are recommended for two or more devices.

주요 특징

  • Splits one x16 slot into four independent x4 channels with BIOS bifurcation support
  • 20mm spacing improves airflow and prevents overheating for multiple low-profile devices
  • Two SATA 15-pin inputs share up to 75W for stable multi-device operation
  • Gold-plated x16 fingers and Foxconn connectors ensure reliable signal transmission
  • Verified PCIe 3.0 speeds reach ~3,570 MB/s read and ~2,685 MB/s write per channel

사양

BrandHOOCCC
SeriesAdapter Card
TypePCI Express to PCI Card
External USB PortsPCI Express
External Ports4 x Serial Ports
Internal PortsPCI Express

이 상품에 대한 질문

My motherboard only has one x16 slot; what BIOS setting must it support so the HOOCCC card can split that slot into four x4 links?

The motherboard BIOS must allow the x16 slot to be configured in x4x4x4x4 bifurcation mode; without that setting the card will not present four independent x4 channels.

I plan to keep my older PCIe 2.0 NVMe SSDs; will they work at their rated speed when installed behind this bifurcation card?

Older PCIe 2.0 drives will function but are limited to their native 2.0 transfer rates; the card itself passes PCIe 3.0 x4 bandwidth to each port.

After installing the card and drives, how can I verify that each of the four ports is actually running at PCIe 3.0 x4?

In the OS device manager or with lspci, confirm every port reports a x4 link width and 3.0 speed, and run a benchmark such as CrystalDiskMark to see sequential reads near 3570 MB/s and writes near 2685 MB/s on each drive.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.