저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
A silver 2.5 inch SATA SSD with a black label and green circuit board visible

HPE

HP FF3D516G6000HC38ADC01 3.84 TB 2.5" SATA internal SSD

SKU CH-3PC6-B1ANQ MPN FF3D516G6000HC38ADC01

A 3.84 TB 2.5" SATA mixed-use SSD with digitally signed firmware and 3.35 million hours of qualification testing

  • High capacity for data-intensive workloads with 3.84 TB storage
  • Mixed-use endurance handles high random read and write IOPS
  • SATA 6G interface provides 600 MB/s transfer speed
  • Digitally signed firmware ensures trusted firmware source
  • Smart Carrier icons and do-not-remove button simplify drive management

3.84 TB SATA Mixed-Use SSD

This 3.84 TB internal SSD uses a 2.5 inch SATA form factor and is built for mixed-use workloads. It targets server and storage arrays that need balanced read and write endurance. HPE digitally signed firmware helps protect the drive from unauthorised code. The Smart Carrier adds status icons and a do-not-remove button to reduce human error.

SATA 6G interface limits

The drive connects through a SATA 600 interface, which caps sequential throughput at the bus maximum. Random IOPS will be lower than SAS alternatives that deliver roughly twice the IOPS of SATA SSDs. Mixed-use rating means write endurance is lower than write-intensive models. The 3.35 million hours of qualification testing reflect reliability at this interface speed.

Check controller and carrier fit

Verify that your server or enclosure accepts 2.5 inch SATA drives and supports the HPE Smart Carrier latch mechanism. Confirm the backplane or RAID controller can expose the drive's wear-monitoring data through HPE SmartSSD Wear Gauge. Ensure firmware policies allow digitally signed images so the drive passes validation on boot.

주요 특징

  • High capacity for data-intensive workloads with 3.84 TB storage
  • Mixed-use endurance handles high random read and write IOPS
  • SATA 6G interface provides 600 MB/s transfer speed
  • Digitally signed firmware ensures trusted firmware source
  • Smart Carrier icons and do-not-remove button simplify drive management

사양

이 상품에 대해 아직 공개된 사양이 없습니다.

이 상품에 대한 질문

Which capacity and form-factor version of this HP drive should I select for a 2.5-inch SATA bay?

The single listed variant is a 3.84 TB drive in a 2.5-inch SFF form factor with a SATA 6G interface, so it fits directly into any standard 2.5-inch SATA hot-plug or cabled bay.

What does the 3.84 TB Mixed Use rating mean for everyday database workloads?

It indicates the drive is tuned for balanced random read and write IOPS, making it suitable for transactional databases and virtualised workloads that need consistent latency under mixed I/O patterns.

How does the SATA 6G interface limit real-world throughput on this SSD?

The SATA 6G link caps sequential transfer at roughly 600 MB/s, so sustained reads and writes will not exceed that ceiling even though the NAND could run faster.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.