저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Green circuit board M.2 2280 SSD with black controller and silver label

ITEMPOWERS

ITEMPOWERS NVMe 3.0 1TB 2280 SSD internal SSD

SKU CH-0GKN-FT769

One-terabyte M.2 2280 NVMe SSD using PCIe 3.0 x4 with up to 3500 MB/s read and 3000 MB/s write speeds

  • Device TypeInternal Solid State Drive (SSD)
  • Used ForLaptop and Desktop PC
  • Form FactorM.2 2280
  • Capacity1TB
  • Memory Components3D NAND
  • InterfacePCIe 3.0 x4 NVMe

NVMe Version NVMe 3.0

Capacity 1TB

  • 1TB capacity stores operating system, games and large media files
  • PCIe 3.0 x4 NVMe interface delivers up to 3500 MB/s sequential read speed
  • Up to 3000 MB/s sequential write accelerates file saves and project exports
  • M.2 2280 form factor fits supported laptop and desktop motherboards
  • 3D NAND solid-state design runs silently with low power draw

ITEMPOWERS NVMe 3.0 1TB 2280 SSD

This internal solid state drive uses a PCIe 3.0 x4 NVMe interface in the M.2 2280 form factor. It is built for compatible laptops and desktop PCs that have an NVMe M.2 slot. The 3D NAND design delivers quiet operation and low power use for daily computing tasks.

PCIe 3.0 x4 NVMe interface

The drive connects through a PCIe 3.0 x4 NVMe link and reaches up to 3500 MB/s sequential read and up to 3000 MB/s sequential write. Your motherboard or laptop must provide an M.2 slot that supports NVMe and the 2280 length for the drive to work at these speeds.

1TB capacity for OS and files

One terabyte holds an operating system, games, work documents, photos and videos with room for future growth. The solid state design handles everyday workloads reliably; sustained heavy write workloads will eventually reach the limits of the controller and NAND endurance.

주요 특징

  • 1TB capacity stores operating system, games and large media files
  • PCIe 3.0 x4 NVMe interface delivers up to 3500 MB/s sequential read speed
  • Up to 3000 MB/s sequential write accelerates file saves and project exports
  • M.2 2280 form factor fits supported laptop and desktop motherboards
  • 3D NAND solid-state design runs silently with low power draw

사양

BrandITEMPOWERS
ModelNVMe 3.0 1TB 2280 SSD
Part NumberIPNV31T2280
Device TypeInternal Solid State Drive (SSD)
Used ForLaptop and Desktop PC
Form FactorM.2 2280
Capacity1TB
Memory Components3D NAND
InterfacePCIe 3.0 x4 NVMe
ProtocolNVMe
ConnectorM.2
ControllerN/A
CacheN/A
EncryptionN/A
Max Sequential ReadUp to 3500 MB/s
Max Sequential WriteUp to 3000 MB/s
Sustained Sequential ReadN/A
Sustained Sequential WriteN/A
4KB Random ReadN/A
4KB Random WriteN/A
FeaturesHigh-Speed Storage Upgrade
Power Consumption (Idle)N/A
Power Consumption (Active)N/A
Operating Temperature0°C to 70°C
Storage Temperature-40°C to 85°C
Max Shock ResistanceN/A
Max Vibration ResistanceN/A
Height0.5
Width3.5
Depth5.0
Weight0.5
Package Content1 x 1TB NVMe M.2 SSD
Manufacturer RecertifiedNO

이 모델의 다른 버전

같은 라인업에서 3개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

How does the 3500 MB/s read speed translate when the drive is installed in a laptop?

The 3500 MB/s figure is the peak sequential read under ideal conditions; real-world boot and app load times depend on the laptop's PCIe 3.0 x4 implementation and thermal limits.

What does the PCIe 3.0 x4 interface cap in practice?

PCIe 3.0 x4 limits the drive to a theoretical maximum of about 3500 MB/s read and 3000 MB/s write, so the SSD cannot exceed those bandwidth ceilings.

What length M.2 slot is required to fit the 2280 form factor?

The drive uses the M.2 2280 form factor, so the system must provide an M.2 slot that accepts 80 mm long modules and is keyed for NVMe PCIe 3.0 x4.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.