SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00502532BTC
재고 있음
KEHIPI
KEHIPI ESP32-S3 Mini Development Board 3PCS
Pack of three ESP32-S3 boards with dual-core 240 MHz processor, 2.4 GHz Wi-Fi, Bluetooth 5, 4 MB Flash and 2 MB PSRAM
- Dual-core 240 MHz processor handles parallel IoT tasks
- 34 GPIO pins support SPI I2C UART I2S ADC interfaces
- 4 GHz Wi-Fi 802.11 b/g/n connects sensors to cloud
- Bluetooth 5 LE enables low-power links to phones or gateways
- 4 MB Flash plus 2 MB PSRAM stores firmware and buffers data
Triple-pack ESP32-S3 boards for parallel prototyping
This pack supplies three identical ESP32-S3 Mini development boards, each built around the ESP32-S3FH4R2 module with a dual-core Xtensa LX7 processor clocked at 240MHz. Onboard memory includes 512KB SRAM, 384KB ROM, 4MB Flash and 2MB PSRAM. Integrated 2.4GHz Wi-Fi 802.11 b/g/n and Bluetooth 5 LE provide wireless connectivity for IoT edge projects.
Replaces single-board purchases when concurrent
Buyers who previously ordered one board at a time can now run firmware on multiple nodes simultaneously, accelerating mesh-network debugging or sensor-cluster validation. The jump is worth it when a project demands synchronized flashing, A/B firmware comparison or redundant gateway prototypes without waiting for reorders.
Sustained operation stays stable through low-power
Flexible clock management and independent module power-supply settings let each board throttle frequency during idle periods, reducing thermal load during long-running data-logging sessions. The castellated module design with ceramic antenna maintains consistent RF performance when boards are soldered directly onto custom carrier PCBs inside sealed enclosures.
주요 특징
- Dual-core 240 MHz processor handles parallel IoT tasks
- 34 GPIO pins support SPI I2C UART I2S ADC interfaces
- 4 GHz Wi-Fi 802.11 b/g/n connects sensors to cloud
- Bluetooth 5 LE enables low-power links to phones or gateways
- 4 MB Flash plus 2 MB PSRAM stores firmware and buffers data
사양
| Brand | waveshare |
|---|---|
| Model | 3PCS ESP32-S3-Zero |
| Part Number | 3PCS ESP32-S3-Zero |
이 상품에 대한 질문
What board footprint do the castellated edges of the ESP32-S3 Mini fit?
The castellated module is designed for direct soldering onto a carrier board; match the pad pitch to the module outline when laying out the footprint.
How do I put the ESP32-S3 Mini into download mode for the first firmware flash?
Hold the BOOT button, press and release the RST button, then release BOOT; the USB serial port will appear ready for the flashing tool.
When should I plan to reflow or replace the onboard 4MB Flash chip?
The 4MB Flash is rated for typical endurance cycles; rework is only needed if write failures appear after extensive OTA updates.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
