EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
KEHIPI
A 64MP autofocus camera module with a 1/1.32" sensor and ABS case for Raspberry Pi boards
The KEHIPI OwlSight module uses a 1/1.32 inch sensor to deliver 64 MP stills at 9248 x 6944 pixels and supports 10x digital zoom. It offers auto, manual and continuous focus modes for flexible imaging and ships in a protective ABS case measuring 24 x 25 mm. The board is designed for Raspberry Pi platforms and works natively with libcamera.
Raspberry Pi 2, 3 and Zero W boards may not reach the maximum resolution because they have less than 1 GB of RAM; verify your board meets or exceeds that threshold. On Pi 4 and CM4 the CMA memory limit can also restrict full-resolution capture, so be prepared to switch from GUI to terminal mode if needed. Ensure your existing Pi has the standard CSI connector for this module.
Suits hobbyists and developers building Pi-based camera projects that demand 64 MP detail and flexible focus control. Not suited for users whose Pi boards lack the required RAM or CSI interface, or for anyone expecting a tripod in the package.
| Brand | Arducam |
|---|---|
| Model | B048301 |
The parcel contains the 64MP camera module and an ABS case. The tripod is not included and must be purchased separately.
Raspberry Pi 4, CM4 and Pi 5 with at least 1GB RAM can reach maximum resolution; Pi 2, 3 and Zero W may be limited by memory constraints.
The 10x digital zoom crops into the 9248x6944 sensor output, so zoomed shots lose pixel count but retain the sensor’s native detail at the centre.
이 진열대의 다른 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
결제할 코인과 가격을 확인할 통화입니다.
체크아웃 시 지갑에서 전송됩니다.
표시 전용 — 카탈로그 가격은 달러 기준입니다.
일치하는 통화가 없습니다.
사이트에서 사용할 언어를 선택하십시오.
No language matches that.
처음 방문하셨나요?
이미 계정이 있으신가요?
자동 재설정 기능은 없습니다. 이 쇼핑몰은 어떠한 메일도 보내지 않으므로 요청할 일회용 링크 자체가 없습니다. 계정에 등록된 이메일 주소를 그대로 두시면 담당자가 직접 확인해 처리합니다.
요청 접수
받은편지함으로 오는 것은 아무것도 없습니다 — 이 쇼핑몰은 메일을 전혀 보내지 않습니다. 담당자가 직접 확인해 처리합니다.
기억나셨나요?