KEHIPI USB-CAN-A USB to CAN Adapter Model A

USB-CAN-A Adapter

The KEHIPI USB-CAN-A adapter converts a USB port into a CAN bus interface using an STM32 chip. It supports both CAN2.0A standard frames and CAN2.0B extended frames with configurable baud rates from 5Kbps to 1Mbps. Engineers and developers use it for vehicle diagnostics, industrial automation, and embedded system testing where direct CAN access is required. The device includes Windows configuration software for parameter setup and data logging.

Host Compatibility Check

Verify that your host system provides a standard USB virtual COM port and can run the supplied Windows configuration utility. The USB serial baud rate is adjustable between 9600 and 2000000bps, defaulting to 2000000bps, so terminal software must match this setting. Ensure your application can send and receive serial commands to configure the four working modes and CAN filters before deployment. No additional drivers are mentioned beyond the standard USB CDC class.

Sustained Operation Behaviour

Onboard TVS protection suppresses surge and transient spike voltages during continuous bus activity. Parameters set via software or serial command are saved after power off, preserving mode and filter configuration across sessions. The adapter handles cyclic and regular frame transmission for long-duration logging, while time-stamped sequential display assists extended bus monitoring. The STM32 solution maintains stable communication throughout prolonged use.